Bosch NGMP677UC, Руководство по установке

Страница: 10 / 32

10
4.
Smooth the silicone sealant with a wet and soapy
scraper or finger before it forms a layer.
5.
Allow the silicone sealant to dry before using the
appliance.
Connect Gas Supply
Side View Gas Cooktop Installation
Gas and Electrical Location
Installing the Pressure Regulator
9
WARNING
Do not attempt any adjustment of the pressure
regulator, except when converting to propane.
Adjustments could lead to leaks or cause incorrect
gas pressure to the appliance.
Install the pressure regulator (supplied with unit) to
manifold pipe using Teflon tape on threads of manifold
pipe. Turn to hand tighten plus 1/4 turn, not exceeding
1 turn for alignment.
To prevent possible damage to the gas pressure
regulator, install it after the cooktop is in its permanent
position. When the regulator is securely installed on the
manifold pipe, the conversion nut will be easily
accessible.
For tight installations a suitable kit is available from
Customer Service (order no. 00611084)
Connecting the Gas Supply Line
Connect the gas supply line to the unit pressure
regulator using a ½" metal flex gas line or fixed metal
pipe connection between manual shut-off valve and
pressure regulator. Always install a new gas connection.
A
Cooktop Rough-in Box
B
Arrow on Pressure Regulator
C
Pressure Regulator
D
1/2" Female Pipe Threads
E
Flexible Gas Line
G
Power Cord (40"/1 m)
H
120 Volt Receptacle
J
Gas Cut-off Valve
K
Gas Supply Line Stub-out
L
Floor
VLOLFRQH
%
$
%
&
(
'
*
+
-
/
.
$UURZRQWKHEDFNRI
WKHSUHVVXUHUHJXODWRU
VKRZVWKHGLUHFWLRQRI
JDVIORZ
A
Appliance Manifold Connection
B
Conversion Nut
C
Pressure Regulator
$
% &