Bosch NGM5458UC, Руководство по установке

Страница: 9 / 52

Installation procedure
en-us
9
Installation with horizontal panel
If there is no oven beneath the cooktop, install a horizontal
panel. To allow access to the power supply connection
and regulator maintain a minimum clearance of
⅜" (10 mm) from the edges of the panel (F).
IMPORTANT: Complete the installation of the cooktop be-
fore installing the horizontal panel.
Installation above a drawer
A min. ¾" (19 mm)
max. 2" (50 mm)
B 5⅞" (150 mm)
C 2¾" (70 mm)
D min. 0" (0 mm)
E 2⅜" (60)
F min. ⅜" (10 mm)
Installation above a cabinet door
A min. ¾" (19 mm)
max. 2" (50 mm)
B 5⅞" (150 mm)
C 2¾" (70 mm)
D min. 0" (0 mm)
E 2⅜" (60)
F min. ⅜" (10 mm)
G min. 1" (25)
Installation procedure
4 Installation procedure
Installation procedure
Follow these instructions to install the cooktop into the
countertop.
CAUTION
Sharp edges.
▶
Use protective gloves when installing the appliance.
4.1 Preparing the cooktop
1.
Place the cooktop face down on a soft and stable sur-
face. Use the foam sheet from the packaging to protect
surfaces from scratching.
2.
Apply the included foam sealing tape around the edges
of the underside of the appliance along the rough-in box
flange.
3.
Insert the two fixing clips into the slots at the rear side of
the cooktop.