Bosch NES 730 UC, Инструкция по использованию и уходу

Страница: 9 / 48

NES Cooktop Use and Care Manual
Cookware Characteristics
The choice of pans directly affects the cooking speed
and uniformity. For best results select pans with the
following features:
1. Flat Bases - When a pan is hot, the base (pan
bottom) should rest evenly on the surface without
wobbling (rocking). Flat, medium to heavy-weight
pans are best.
To test the flatness of your pans
Turn the pan upside down on the countertop and place
a ruler flat against the bottom of the pan. The bottom
of the pan and the straight edge of the ruler should be
flush against each other.
Another simple test to determine even heat
distribution across the cookware bottom is to place
1” of water in the pan. Bring the water to a boil and
observe the location of the bubbles as the water starts
to boil. Good, flat cookware will have an even
distribution of bubbles over the bottom surface area.
2. Diameter – The base of the pan should cover or
match the diameter of the element being used.
Pans may overhang the element area by 1" all
around.
3. Tight Fitting Lid – A lid shortens cooking time by
holding the heat inside the pan.
Specialty pans
Specialty pans, such as griddles, roasters, pressure
cookers, woks, water bath canners and pressure
canners must have the same features as described
above. Use only a flat-bottom wok. Never place a
support ring, such as a wok ring or trivet, on the
cooking surface.
PAGE 7
Cooktop Operating Instructions
Using Proper Cookware
CAUTION
• Foods packaged in aluminum foil should not
be placed directly on the glass ceramic surface for
cooking; aluminum foil can melt and cause perma-
nent damage.
• Plastic, paper and cloth can melt or burn
when in contact with a hot surface. Do not let
these items come in contact with the hot glass
ceramic surface.
• Do not allow pans to boil dry. This can
permanently damage the pan, the element and
the cooktop glass.
Cookware Tips
• Use of pots and pans with rounded (either
concave or convex) warped or dented bottoms
should be avoided. See drawings above.
• Make sure the bottom of the pot or pan being
used is clean and dry.
• Use pots and pans with thick, smooth metal
bottoms.
• Do not slide metal pots across the cooktop. Pans
may leave marks. (See Page 9 for cleaning.)
• Do not use glass pans as they may scratch the
surface.