Appliance door
en
21
3.
Close the appliance door fully . Grab hold of the
appliance door with both hands (on the left and
right) and pull it upwards and out .
4.
Carefully place the appliance door on a level sur-
face.
5.
Push on the left- and right-hand side of the door
cover from the outside until it is released.
6.
Remove the door cover .
7.
Lift out the inner pane and set it down carefully on a
flat surface .
8.
Lift out the intermediate pane and set it down care-
fully on a flat surface .
9.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶
Do not use glass scrapers, sharp or abrasive
cleaning aids, or harsh cleaning products.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
10.
Clean the appliance door.
"Suitable cleaning agents", Page 14
11.
Dry the door panes and refit them.
"Installing the door panes for the upper the appli-
13.8 Installing the door panes for the upper
the appliance door
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
1.
Slide in the intermediate pane. When doing so, en-
sure that the number on the intermediate pane is at
the bottom right .
2.
Slide the intermediate pane until it is in the left- and
right-hand retainers .
3.
Push the intermediate pane upwards until it is in the
retainer .
4.
Place the inner pane onto the seal .
