en
Installation instructions
28
Food
Accessories/cook-
ware
Shelf pos-
ition
Type of
heating
Temperature in
°C
Cooking time in
mins
Small cakes, 2 levels
Universal pan
+
Baking tray
3+1
150-160
1
25-35
Hot water sponge cake
Springform cake tin,
diameter 26 cm
1
160-170
2
25-35
Hot water sponge cake
Springform cake tin,
diameter 26 cm
1
160-170
2
25-35
1
Preheat the appliance for five minutes. Do not use the rapid heating function.
2
Preheat the appliance. Do not use the rapid heating function.
Grilling
Selection for the main oven
Food
Accessories/cookware
Shelf pos-
ition
Type of
heating
Temperature in
°C/grill setting
Cook-
ing time
in mins
Toasting bread
Wire rack
3
3
1
0.5–1.0
1
Preheat the appliance for five minutes. Do not use the rapid heating function.
Grilling
Selection for the top oven
Food
Accessories/cookware
Shelf pos-
ition
Type of
heating
Temperature in
°C
Cook-
ing time
in mins
Browning toast
Wire rack
3
3
4-6
18 Installation instructions
Observe this information when installing the appliance.
18.1 General installation instructions
Follow these instructions before you start with
the installation of the appliance.
¡
The safe operation of this appliance can
only be guaranteed if it has been installed
to a professional standard in accordance
with these installation instructions. The in-
staller shall be liable for damages incurred
as a result of incorrect installation.
¡
Do not use the door handle for the trans-
port or installation.
¡
The appliance must be transported by two
people using the carry handles on the right
and left.
¡
Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡
Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡
Proceed in accordance with the installation
sheets for installing accessories.
¡
Fitted units must be heat-resistant up to
95 °C, and adjacent unit fronts up to
70 °C.
¡
Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡
Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.