IP Camera 200 Series
Advanced Mode | en
115
Bosch Security Systems
Installation and Operation Manual
AR18-10-B012 | v1.54 | 2011.08
RTSP port
If necessary, select a different port for the exchange of the
RTSP data from the list. The standard RTSP port is 554. Select
Off
to deactivate the RTSP function.
UPnP
Select
On
to activate UPnP communication. Select
Off
to
deactivate it.
When UPnP is activated the camera reacts to requests from the
network and is registered automatically as a new network
device on the inquiring computers.
Note:
To use the UPnP function on a computer with Windows XP or
Windows Vista, the Universal Plug and Play Device Host and the
SSDP Discovery services must be activated
This function should not be used in large installations due to
the large number of registration notifications.
TCP metadata input
The device can receive data from an external TCP sender, for
example an ATM or POS device, and store it as metadata.
Select the port for TCP communication. Select
Off
to
deactivate the function. Enter a valid
Sender IP address
.
6.8.3
WLAN
To use a wireless LAN connection proceed as follows:
1.
To activate the wireless LAN connection select
Auto
from
the drop down box.
2.
Select your region in the
Region code
drop down box.
3.
If you know the service set identifier enter it in the
SSID
box. If you do not know, click
Scan
to see a list of available
services and then click a service.
4.
Enter the encryption key to get access to the network in
the
PSK
box
. Reboot and remove Ethernet cable immediately
.
Note:
To enhance network security, only WPA-PSK (TKIP) and WPA2-
PSK (AES) encryption is supported.
Содержание NBC-255-W
Страница 1: ...HD 720p IP Wireless Camera NBC 265 W en Installation and Operation Manual ...
Страница 2: ......
Страница 100: ......
Страница 101: ...Bosch Security Systems www boschsecurity com Bosch Security Systems 2012 ...
