Bosch MXH180 Скачать руководство пользователя

Страница: 14 / 64

-14-

APPLICATIONS

Your  Bosch  MXH180  oscillating  tool  is
intended  for  sanding  and  cutting  wooden
materials,  plastic,  plaster  and  non-ferrous
metals.  It  is  especially  suitable  for  working
close  to  edges,  in  tight  spaces,  and  for  flush
cutting.

Below are some typical uses for your Bosch
MXH180 oscillating tool.

For all accessories, work
with the accessory away

from the body.

Never position hand near or

directly in front of working area. Always hold
the tool with both hands and wear protective
gloves.

Flush Cutting

Remove excess wood from door jamb, window
sill and/or toekick. Removing excess copper or
PVC pipe.

Removal work

e.g. carpets & backing, old tile adhesives,
caulking on masonry, wood and other
surfaces.

Removal of excess materials

e.g. plaster, mortar splatters, concrete on tiles,
sills.

Preparation of surfaces

e.g. for new floors and tiles.

Detail sanding

e.g. for sanding in extremely tight areas
otherwise difficult to reach and require hand
sanding

CUTTING

Saw blades are ideal for making precise cuts
in tight areas, close to edges or flush to a
surface.

Select  a  medium  to  high  speed  for  making
initial  plunge,  start  off  at  medium  speed  for
increased control. After making your initial cut,
you  can  increase  speed  for  faster  cutting
ability.

Flush cutting blades are intended
to make precise cuts to allow for
installation of flooring or wall
material. When flush cutting it is

important  not  to  force  the  tool  during  the
plunge cut. If you experience a strong vibration
in  your  hand  during  the  plunge  cut,  this
indicates  that  you  are  applying  too  much
pressure.  Back  the  tool  out  and  let  the  speed
of the tool do the work. While keeping the teeth

of the blade in the work surface, move the
back of the tool in a slow sideways motion.
This motion will help expedite the cut.

When  making  a  flush  cut  it  is  always  a  good
idea  to  have  a  piece  of  scrap  material  (tile  or
wood) supporting the blade. If you need to rest
the  flush  cutting  blade  on  a  delicate  surface,
you should protect the surface with cardboard
or masking tape.

The flat saw blade is ideal for
making precise cuts in wood,
plaster, drywall material.

Applications  include  cutting  openings  in
flooring  for  venting,  repairing  damaged
flooring,  cutting  openings  for  electrical  boxes.
The blade works best on softer woods such as
pine.  For  harder  woods,  the  blade  life  will  be
limited.

Select a medium to high speed.

The flat saw blade can also be used for
window restoration making glazing easy to
remove. The saw blade can be placed directly
against the edge of the window frame, guiding
the blade through the glazing.

GROUT REMOVAL

Grout removal blades are ideal
for removing damaged or cracked
grout. Grout blades come in

different  widths  (1/16"  and  1/8")    to  tackle
different  grout  line  widths.  Before  selecting  a
grout  blade  measure  the  grout  line  width  to
pick the appropriate blade.

Select a medium to high speed.
To  remove  the  grout,  use  a  back  and  forth
motion, making several passes along the grout
line. The hardness of the grout will dictate how
many  passes  are  needed.  Try  and  keep  the
grout blade aligned with the grout line and be
careful not to apply too much side pressure on
the grout blade during the process. To control
plunge  depth  use  the  carbide  grit  line  on  the
blade as an indicator. Be careful not to plunge
beyond the carbide grit line to avoid damage to
the backer board material.
The grout blades can handle both sanded and
unsanded  grout.  If  you  notice  the  blade
clogging during the grout removal process, you
can  use  a  brass  brush  to  clean  the  grit,  thus
exposing the grit again.
The grout blade geometry is designed so that
the  blade  can  remove  all  grout  up  to  the