8
en
Operation
Working with the bowl and the tools
Fig.
E
:
■ Press the Release button and
move the swivel arm to
position
2
.
■ Insert the bowl:
Tilt the bowl forwards and then set it
down. Turn anti-clockwise until it locks
into place.
■ Depending on the processing task, insert
the stirrer, whisk or kneading hook until it
locks into position.
Note:
If using the kneading hook, rotate the dough
deflector until the kneading hook can lock
into position
(Fig.
E
-4b)
.
■ Put the ingredients to be processed into
the bowl.
■ Press the Release button and
move the swivel arm to
position
1
.
■ Attach the cover.
■ Set the rotary switch to the desired
setting.
Our recommendation:
–
Stirrer:
first stir in at setting 1, then select
setting 4
–
Whisk:
setting 4, mix in at setting 1
–
Kneading hook:
first stir in at setting 1, knead at setting 2
Adding more ingredients
■ Switch off the appliance with the rotary
switch.
■ Add more ingredients through the feed
tube in the cover.
or
■ Remove lid.
■ Press the Release button and
move the swivel arm to
position
2
.
■ Add ingredients.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Remove mains plug.
■ Remove lid.
■ Press the Release button and
move the swivel arm to
position
2
.
■ Take the tool out of the drive.
■ Remove the bowl.
■ Clean all parts, see “Cleaning and
servicing”.
Continuous-feed shredder
W
Risk of injury
Do not grip the sharp blades or edges of the
cutting discs. Take hold of cutting discs by
the edge only. Before attaching / removing
the continuousfeed shredder, wait until the
drive has come to a standstill and pull out
the mains plug. Do not reach into the feed
tube.
Warning!
The continuous-feed shredder must be
completely assembled before use. Never
assemble the continuous-feed shredder on
the base unit. Operate the continuous-feed
shredder in the indicated operating position
only.
Predetermined breaking point
Fig.
F
:
The built-in predetermined breaking point
protects the drive of the appliance. If an
overload occurs, the drive shaft of the con
-
tinuous-feed shredder breaks. However, the
drive shaft can easily be replaced. A new
disc holder with drive shaft is available from
customer service.
Reversible slicing disc –
thick / thin
for slicing fruit and vegetables.
Process at setting 3.
Designation on the reversible slicing disc:
“1” for the thick slicing side
“3” for the thin slicing side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, rolls or choco
-
late. Slice boiled, waxy potatoes only when
they are cold.
121_MUM50112_8001027210.indb 8
27.11.2015 09:20:45
Содержание MUM50112
