Bosch MUM Series, Инструкция по применению

Страница: 35 / 144

Troubleshooting en
35
11 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
Appliance does not
start processing.
Rotary switch is set incorrectly.
▶
Set the rotary switch to before processing.
Appliance does not
start processing or
switches off during
processing.
Swivel arm is not engaged properly or has become
detached.
1.
Set the rotary switch to ⁠.
2.
Move the swivel arm until it engages correctly.
The swivel arm cannot
be opened or closed
because the tool is
jammed in the bowl.
Drive is not in the parked position after a safety sys-
tem has stopped processing or the power supply has
been interrupted.
1.
Set the rotary switch to ⁠.
2.
Eliminate the problem that caused the appliance to
stop.
→ "Safety systems", Page 31
3.
When the swivel arm is open, remove the tool and
close the swivel arm.
4.
Set the rotary switch briefly to and then back to
⁠.
a
The drive remains on for a short time until the
parked position is reached.