Bosch MSMS CN Series, Инструкция по эксплуатации

Страница: 13 / 23

13
en Beforeusingtheapplianceforthefirsttime
On button
Ã
For using the appliance at the preselected
speed. The appliance will continue to run as
long as the button is pressed.
Turbo button
Â
For using the appliance at the maximum
speed. The appliance will continue to run as
long as the button is pressed.
Note: The speed setting has no influence
on use of the Turbo button  .
Caution!
Never press the On button
Ã
and the
Turbo button
Â
at the same time.
Recommended speeds
●-8 For mixing liquids and hot food and
for mixing in
8-12
For mixing and pureeing fruit or
cooked vegetables
 For making mayonnaise
Use with: universal cutter (L / XL),
masher attachment, whisk
Release buttons
To remove the blender foot or other
accessories, press both release buttons
simultaneously.
Stainless steel blender foot
The blender foot is suitable for cutting
and mixing mayonnaise, sauces, blended
drinks, baby food, cooked fruit and cooked
vegetables, and for pureeing soups.
Accessories
If an accessory is not included with the
hand blender, it can be ordered from
customer service:
Accessories Order no.
Universal cutter L 12019196
Universal cutter XL 12019197
Whisk 12019198
“ProPuree” masher attachment 12017506
Multifunction accessory
(CNHR32)
11020079
Before using the appliance
for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging and
dispose of all packing materials.
■ Check that all the parts are present and
examine them for obvious damage.
X Fig.
A
■ Thoroughly clean and dry all parts
before using for the first time.
X
“Care and daily cleaning” see
page 14
Symbols and markings
Symbol Meaning
i
Follow the instructions in the
operating instructions.
Í
Marking on blender foot:
Only immerse the blender
foot into the food as far as the
marking Í or there will
be a risk of electric shock!
Parts and operating
controls
Speed setting
For continuous speed adjustment. Set the
rotaryselectorbetween●(lowestspeed)
and 12 (highest speed). Read off the
selected speed on the marking Æ .