Bosch MSK030B-0900-NN Скачать руководство пользователя страница 262

Страница: 262 / 282

13.2

Operation

During operation, ensure that the ambient conditions described are observed

(see

chapter 9 "Operating conditions and application notes" on page 203

13.3

Shutdown

In the event of malfunctions, maintenance measures or shutting down the

motors, please proceed as follows:

1. Follow the instructions in the machine documentation.
2. Use the machine-side control commands to decelerate the drive to a

controlled standstill.

3. Switch off the power and control voltage of the control unit.
4. Only for motors with fan unit: Switch off the motor protection switch for

the fan unit.

5. Switch off the main switch of the machine.
6. Secure the machine against unpredictable movements and against op‐

eration by unauthorized persons.

7. Wait until the discharging time of the electrical systems has elapsed and

then disconnect all electrical connections.

8. Before disassembling the motor and, if applicable, the fan unit, secure

them against dropping or moving and afterwards, disconnect the me‐

chanical connections.

Bosch Rexroth AG

DOK-MOTOR*-MSK********-PR12-EN-P

260/279

Synchronous Servomotors MSK

Commissioning, operation and maintenance

Содержание MSK030B-0900-NN



























































































































































































































































































Результаты поиска

Содержание MSK030B-0900-NN

Отзывы:

Bosch MSK030B-0900-NN, Руководство по планированию проекта, Страница: 262 / 282

Результаты поиска

Содержание MSK030B-0900-NN

Отзывы: