manualshive.com logo in svg

Bosch MSK030B-0900-NN, Руководство по планированию проекта, Страница: 18 / 282

Поделиться
Скачать
Bosch MSK030B-0900-NN Скачать руководство пользователя страница 18

●

Risk of burns by hot housing surfaces!

●

Risk of injury by improper handling! Injury by crushing, shearing, cutting,

hitting!

●

Risk of injury by improper handling of batteries!

●

Risk of injury by improper handling of pressurized lines!

 

3.3 

Danger-related notes

3.3.1 

Protection against Touch of Electric Parts and Housings

This  section  concerns  components  of  electric  drive  and  control

systems with a voltage over 50 volt.

In the case of touching parts with a voltage higher than 50 volt, this can be

dangerous for personnell and can lead to electric shock. During operation of

components of electric drive and control systems, certain parts of these com‐

ponents are inevitably under dangerous voltage.
 
High electrical voltage! Danger of life, risk of injury due to electric shock or

heavy bodily harm.
●

Operation,  maintenance  and/or  repair  of  components  of  electric  drive

and control systems may only be done by qualified personnel.

●

Observe the general construction and safety instructions about work on

high voltage systems.

●

Before switching on, establish the fixed connection of the protective con‐

ductor  to  all  electric  components  according  to  the  interconnection  dia‐

gram.

●

Operation, even for short-term measuring and testing purposes, is only

permitted with the protective conductor securely connected to the com‐

ponent points provided.

●

Disconnect electric components from the mains or from the power sup‐

ply,  before  you  have  contact  with  electric  parts  with  a  voltage  higher

than 50 V. Secure the electric components against restarting.

●

Observe for electrical components:
Please, always wait 30 minutes, after switch-off, so live capacitors dis‐

charge before they have access to electric components. To exclude any

danger due to any contact, measure electric voltage of live parts before

working.

●

Before switch-on install the provided covers and protective devices for

the touch guard.

●

Do not touch any electric junctions of live components.

●

Do not disconnect or connect connectors under voltage.

 
High housing voltage and high discharge current! Danger! Risk of injury due

to electric shock!
●

Before switch-on and start-up, ground or connect the components of the

drive and control system with the protective conductors on the ground‐

ing points.

Bosch Rexroth AG

 DOK-MOTOR*-MSK********-PR12-EN-P

16/279

Synchronous Servomotors MSK

Safety notes for electric drives and controls

Содержание MSK030B-0900-NN



























































































































































































































































































Отзывы:

Нет отзывов