Bosch MMB21 series, Инструкция по эксплуатации, Страница: 14 / 186

14
Safety systems
en
Safety systems
Start lock-out
The appliance cannot be switched on until
the blender jug has been turned irmly into
place.
Automatic disconnection
The appliance switches off automatically
if the blender jug accidentally becomes
detached during operation.
See “Troubleshooting”.
Overview
These operating instructions refer to various
models. An overview of the different models
can be found on the illustrated pages
(Fig. F )
.
Please fold out the illustrated pages.
1 Motor block
2 Rotary switch
P
= Stop
1
= Lowest operating speed
2
= Highest operating speed
Q
= pulse circuit at maximum speed,
hold down switch for required duration
3 Cord store
4 Drive
Plastic blender jug (MMB21...)
5 Blender jug with blade
Do not process deep-frozen ingredients
(except ice cubes).
6 Lid with feed tube
7 Measuring cup with scale
(max. 50 ml)
Glass blender jug (MMB42...)
8 Blade holder with blender blade and
seal
9 Blender jug made of borosilicate glass
Especially heat-resistant, even very hot
ingredients can be processed.
10 Lid with feed tube
11 Measuring cup with scale
(max. 50 ml)
12 Smoothie insert*
For the preparation of fruits and other
ingredients into juices and smoothies.
The insert ensures that pips and other
solid ingredients are iltered out and do
not get into the drinks.
* Not all models.
Operation
The blender is suitable for
–
blending and frothing liquids,
–
cutting and chopping raw fruit, vegeta-
bles, nuts and chocolate,
–
puréeing soups, cooked fruit and
vegetables,
–
preparing mayonnaise and sauces.
Pay attention to
Figure G
in the table!
Note:
If the universal cutter is not included
with the hand blender, it can be ordered from
customer service (order no. 12007111).
The appliance is suitable for preparing the
following quantities:
Solid food 100 g
Liquids max. 1.5 l
Hot or frothing liquids max. 0.5 l
W
Risk of injury from sharp blades/
rotating drive!
Never place ingers in the attached blender
jug. Never operate the appliance without a
completely assembled blender or attached
lid! Do not remove or attach blender jug until
the appliance has been switched off and
the drive has come to a standstill. When the
appliance has been switched off, the blade
continues running briely.
W
Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Pour maximum
0.5 litres of hot or frothing liquid into the
blender jug.
Warning!
Never operate an empty blender. Always
work with a completely assembled appli-
ance. Screw the blender jug fully onto the
motor block.