Bosch MMB21 GB Series, Инструкция по эксплуатации

Страница: 6 / 51

Robert Bosch Hausgeräte GmbH 15
en
Working with the smoothie insert
With this insert it is particularly easy to make
smoothies made of fresh fruits, milk, soya
milk, yoghurt and juices.
Fig.


Prepare blender as described above.

After attaching and screwing on the
blender jug, the smoothie insert
is inserted into the blender jug.

Put lid on and press down all the way.

Insert the mains plug.

Put ingredients through the feed tube into
the blender jug; chop up fruit beforehand
if required.
Warning!
Do not put large, hard ingredients in the
blender jug, e.g. stones from avocados
or plums.

Insert measuring cup into feed tube.

Switch on the appliance.
After using the appliance

Set the rotary switch to 0/off.

Remove mains plug.

Remove the blender jug by rotating
it in an anti-clockwise direction.

Remove lid.

Take measuring cup out of the lid
and plug into the smoothie insert.
This prevents integral components from
falling out of the insert into the drink.

Empty blender jug.

Clean all parts, see “Cleaning and
servicing”.
Cleaning and servicing
The appliance requires no maintenance!
Thorough cleaning guarantees a long service
life. An overview of cleaning the individual
parts can be found in Fig.

.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Tips:
– Preferably clean the parts immediately
after use. This will prevent residue
from drying on and attacking the plastic
(e.g. by essential oils in herbs).
– If processing e.g. carrots and red
cabbage, the plastic parts will become
discoloured by a red film which can be
removed with a few drops of cooking oil.
Cleaning the motor block

Remove mains plug.

Wipe motor block with a damp cloth.
If required, use a little detergent.

Then wipe dry.
Cleaning the blender
The blender jug, lid and measuring cup are
dishwasher-safe.
Tip: Pour a little water and washing-up liquid
into the attached blender. Switch to setting
Pulse for several seconds. Pour out the water
and rinse the blender with clean water.
Cleaning blade holder
(only MMB42...)
Do not clean blade holder in the dishwasher,
but under running water using a brush.
Do not leave in water!
Remove seal for cleaning.
Troubleshooting
Fault:
Blender does not start or appliance switches
off during operation.
Possible cause:
The appliance was overloaded (e.g. tool
jammed by food) and the electronic fuse
has tripped.
Risk of electric shock!
Never immerse the motor block in water
and never hold under running water and
do not clean in the dishwasher.
Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. Clean them with a brush.
Risk of injury!
Before rectifying a fault, pull out the mains
plug.
MMB21-42_de-ar.book Seite 15 Montag, 2. Februar 2015 10:17 10
14 Robert Bosch Hausgeräte GmbH
en
Preparation

Before operating the appliance and
accessories for the first time, clean
thoroughly; see “Cleaning and servicing”.

Place motor block on smooth, stable and
clean base.

Unwind the cable to the required length.
Working with the plastic blender jug
(MMB21...)
Fig.


Attach blender jug to the drive on the
motor block. Arrow on the blender jug
points towards the dot on the motor block.

Attach blender blender jug by turning
it all the way clockwise.

Add ingredients.

Put lid on and press down all the way.
Insert measuring cup into feed tube.

Insert the mains plug.

Turn rotary switch to the required
operating speed.

Grip the edge of the lid while operating
the blender.
Do not grip the feed tube!
Add more ingredients

Set the rotary switch to 0/off.
Either

Remove lid.

Add more ingredients.
or

Take out measuring cup.

Add liquids and solid (fairly small) ingre-
dients through the feed tube in the lid.

Switch on appliance again.
After using the appliance

Set the rotary switch to 0/off.

Remove mains plug.

Remove the blender by rotating
it in an anti-clockwise direction.

Take the lid off the blender jug.

Empty blender jug.

Clean all parts, see “Cleaning and
servicing”.
Working with the glass blender jug
(MMB42...)
Fig.


Put blender jug down with the base
face up.

Place seal on the blade holder. Ensure
that the seal is positioned correctly.

Grip blade holder by the handle and insert
into the blender jug.
Note shape of the parts (Fig.

-2a)!

Move handle (Fig.

-2b). This locks
the blade holder in the blender jug.

Turn blender jug over.

Attach blender jug to the drive on the
motor block. Arrow on the blender jug
points towards the dot on the motor block.

Attach blender blender jug by turning
it all the way clockwise.

Add ingredients.

Put lid on and press down all the way.
Insert measuring cup into feed tube.

Insert the mains plug.

Turn rotary switch to the required
operating speed.

Grip the edge of the lid while operating
the blender.
Do not grip the feed tube!
Add more ingredients

Set the rotary switch to 0/off.
Either

Remove lid.

Add more ingredients.
or

Take out measuring cup.

Add liquids and solid (fairly small) ingre-
dients through the feed tube in the lid.

Switch on appliance again.
After using the appliance

Set the rotary switch to 0/off.

Remove mains plug.

Remove the blender jug by rotating
it in an anti-clockwise direction.

Take the lid off the blender jug.

Empty blender jug.

Turn blender jug over and put down with
the opening face down.

Remove blade holder. To do this, fold
the handle upwards and pull out the blade
holder.

Clean all parts, see “Cleaning and
servicing”.
Important information
If the seal is damaged or not correctly
positioned, liquid may run out.
MMB21-42_de-ar.book Seite 14 Montag, 2. Februar 2015 10:17 10
6
en