Reverse the Rain Shield for Inverted Operation
The upright unit can be mounted with the camera ball up or down. When the camera will be in
inverted position, you should reverse the rain shield to provide weather protection for the
window glass.
Figure 10.1: Rain shield
To reverse the rain shield, follow these steps:
1.
Remove the four (4) M3 x 6 screws that hold the rain shield to the face of the camera.
Two screws are on the left of the rain shield; two screws are on the right of the rain
shield.
Figure 10.2: Screw removal
2.
Reverse the rain shield.
3.
Reattach the rain shield to the camera face.
Figure 10.3: Inverted rain shield installed on camera
10
MIC Series 550
Reverse the Rain Shield for Inverted Operation | en
25
Bosch Security Systems, Inc.
Operation Manual
November 2011 | | F.01U.239.454
