Bosch MBE Series, Руководство по установке

Страница: 10 / 26

10 en | MBE-27/28 Wall Mount Applications MBE Mounts and Adapters
| 3.0 | 2011.10 Installation Guide Bosch Security Systems, Inc.
1. Determine a secure mounting location for the wall
installation.
2. Use the six (6) holes on the flanges of the MBE-17 wall-
mount adapter as a template to mark the position where
the holes should be drilled to secure the adapter.
MBE-28 : If routing cables through the wall, use the center
hole on the MBE-17 as a template to drill through the wall.
3. Drill the six (6) holes in the installation location, bolts not
supplied.
Note: The minimum diameter bolt (or stud) required is
6 mm (.25 in.).
4. Orient the MBE-17 so that the 94.2 x 40.0 mm
(3.71 x 1.57 in.) hole pattern is at the top.
5. Using six bolts (or studs) with nuts, washers, and lock
washers, fasten the MBE-17 to its mounting location and
tighten all nuts securely.
6. Align the four holes on the MBE-27B, MBE-27W, or the
MBE-28B bracket with the 94.2 x 40 mm (3.71 x 1.57 in.)
hole pattern on the MBE-17 adapter.
CAUTION!
Ensure that the mounting fasteners have a minimum pull-out
strength of 300 kg (661.4 lbs) per screw
NOTICE!
The fasteners and mounting surface must be capable of
supporting a maximum load of 45 kg (100 lbs).