O
p
e
r
a
t
i
n
g
I
n
s
t
r
u
c
t
i
o
n
s
Display Modes Available For LTC 2600 Series Multiplexers
Full Screen Display:
Shows one camera, full screen on one monitor.
Press
FULL SCREEN
on the front panel, then press the appropriate
camera number.
Quad Screen Display:
Divides the screen into four viewing areas.
Press
QUAD
once to enable the feature. Press
QUAD
repeatedly
to toggle through the viewing configurations (three times for the
9-Channel model; four times for the 16-Channel model; eight times
for
System4
models). Press
ALT
, then
SEQ
to sequence through
all quad screens.
Multiscreen Display:
Enabling this feature shows one of five
multiscreen configurations: 4x4 (16 cameos), 12+1, 8+2, 3x3, and
4+3. Press
MULTI
repeatedly to toggle through the selections.
Cameo Mode:
When in
MULTI
or
QUAD
mode, the screen
area where a camera is displayed is called a cameo. Note that the
numbered front panel keys can refer to either cameras or cameos.
Press
CAMEO
to toggle the operation of these keys to the cameo
function (the
CAMEO
LED is illuminated when the multiplexer is in
cameo
mode). Press
CAMEO
again to revert to the camera function.
Assign a Camera to the Cameo
1) In MULTI or QUAD display mode, press the desired camera key, and then press
CAMEO
. The cameo selected will display a flashing camera title. Select the desired
camera, and the cameo will display the selected camera.
Press
CAMEO
to store and/or exit.
2) Press
ALT
and
SELECT
(the ALT LED will flash). Cameo #1 will be selected
and will show a flashing camera title. Press the desired camera key. Cameo #1 will
display the selected camera, and cameo #2 is automatically selected. Repeat this
procedure for the remaining cameras.
Press
ALT
to exit at any time.
Recording Live Pictures
Press the green
ALT
key, and then press
RECORD
. This
key combination toggles the
record
mode on and off.
For System4 LTC 2672 or LTC 2682 Series:To activate
both VCR outputs, press
ALT
, then
2
, then
RECORD
.
Playback
To playback the recorded pictures, press the green
ALT
key, and then press
PLAY
.
For Simplex models, Record mode must be turned OFF.
Advanced Functions
Zoom:
Enables the active camera display (a cameo in
MULTI
or
QUAD
display) to be digitally enlarged by a factor of 2:1.
Zoom
will be displayed on the monitor screen. Use the arrow
keys for closer inspection of any part of the selected image.
Freeze:
Holds the selected camera picture on either full screen
or cameo. Press
FREEZE
again to release the image from this
function. Changing the
display screen
mode releases the
freeze
mode from all cameos.
Alarms and Actions Acknowledge:
When an alarm or action condition occurs, the action alarm
camera picture displays full screen on Monitor B, and the
ALM or ACT LED flashes.
ALARM/ACTION
will also
flash on Monitor A. Clearing an Alarm/Action by pressing
ACT
or
ALM
will stop any recording associated with that
function. The method of clearing alarms or action conditions
depends on the model of your multiplexer.
Refer to the Instruction Manual for advanced operation
features.
REC
PLAY
