English |
7
To switch the audio signal on or off, press the audio signal
button
(14)
.
Independent of the audio signal setting, a short audio signal
sounds each time a button is pressed on the laser receiver.
Practical Advice
Marking
You can mark the height of the laser beam at the centre
mark
(15)
on the left and right of the laser receiver when the
beam hits the centre of the reception area
(18)
.
When marking, take care to align the laser receiver so that it
is exactly vertical (with a horizontal laser beam) or horizontal
(with a vertical laser beam), as otherwise the marks are off-
set with respect to the laser beam.
Attaching using the holder (see figure B)
You can use the holder
(1)
to attach the laser receiver to a
measuring rod
(20)
(accessory) as well as to other auxiliary
tools with a width of up to
65
mm.
Screw the holder
(1)
to the mount
(4)
on the rear side of the
laser receiver with the fastening screw
(3)
.
Loosen the rotary knob
(13)
on the holder, slide the holder
onto the measuring rod
(20)
and retighten the rotary
knob
(13)
.
You can use a spirit level
(12)
to ensure that the holder
(1)
is
horizontally aligned along with the laser receiver. If a laser
receiver is mounted at an angle, it will give incorrect meas-
urements.
The centre line reference
(2)
on the holder is situated at the
same height as the centre marking
(15)
and can be used for
marking the laser beam.
Attaching using a magnet (see figure C)
If an attachment is not required to be especially secure, the
laser receiver can be attached to steel parts using the mag-
nets
(5)
.
Maintenance and Service
Maintenance and Cleaning
Always keep the laser receiver clean.
Do not immerse the laser receiver in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any de-
tergents or solvents.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at:
www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Cambodia
Robert Bosch (Cambodia) Co., Ltd
Unit 8BC, GT Tower, 08th Floor, Street 169,
Czechoslovakia Blvd, Sangkat Veal Vong
Khan 7 Makara, Phnom Penh
VAT TIN: 100 169 511
Tel.: +855 23 900 685
Tel.: +855 23 900 660
www.bosch.com.kh
People’s Republic of China
China Mainland
Bosch Power Tool (China) Co. Ltd.
Bosch Service Center
567, Bin Kang Road
Bin Kang District
Hangzhou, Zhejiang Province
China 310052
Tel.: (0571) 8887 5566 / 5588
Fax: (0571) 8887 6688 x 5566# / 5588#
E-Mail: [email protected]
www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Co. Ltd.
Flat B, 2/F, Yeung Yiu Chung No. 6 Industrial Building,
19 Cheung Shun Street
Cheung Sha Wan
Kowloon, Hong Kong
Customer Service Hotline: +852 2101 0235
Fax: +852 2590 9762
E-Mail: [email protected]
www.bosch-pt.com.hk
India
Bosch Service Center
69, Habibullah Road, (Next to PSBB School), T. Nagar
Chennai–600077
Phone: (044) 64561816
Bosch Service Center
18, Community Center
Phase 1, Mayapuri
New Delhi–110064
Phone: (011) 43166190
Indonesia
PT Robert Bosch
Palma Tower 10th Floor
Jalan RA Kartini II-S Kaveling 6
Pondok Pinang, Kebayoran Lama
Jakarta Selatan 12310
Tel.: (21) 3005-5800
www.bosch-pt.co.id
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
Bosch Power Tools
1 609 92A 52L | (22.11.2019)
