Bosch LF91BUV50B, Инструкция по установке и эксплуатации

Страница: 7 / 20

Operating the appliance
en
7
1
Operating the appliance
Operating the appliance
These instructions apply to several appliance variants.
It is possible that individual features are described
which do not apply to your appliance.
If your appliance has Home Connect, more functions
are only available in the Home Connect app.
Note:
Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Control panel
Setting the fan
Switching on
■
Touch the
#
symbol.
The fan starts at setting
ƒ
.
■
Slide your finger across the III settings range to
change the fan speed.
Switching off
Touch the
#
symbol.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
Touch the
@
symbol or slide your finger to the right
across control panel III until
2
appears in the display.
Note:
After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
If you would like to stop intensive mode before the
preset time expires, slide your finger to the left across
control panel III to select the fan setting you require.
Lighting
The lighting can be switched on and off independently
of the fan.
Touch the
=
symbol.
Setting the brightness
Press and hold the
=
symbol until the desired
brightness is reached.
Boost function
Switching on
Touch the
&
symbol.
Note:
After approximately 20 seconds, the extractor
hood automatically switches back to the fan setting that
was set beforehand.
Switching off
If you want to end the Boost function before the preset
time expires, touch the
&
symbol.
Automatic mode
Switching on
■
Touch the
#
symbol.
The fan will start at setting 2.
■
Touch the
!
symbol.
The optimum fan setting is set automatically using
an air quality sensor.
Switching off
Touch the
!
or
#
symbol to switch off automatic
mode.
The fan will switch itself off automatically if the air quality
sensor detects no further change in the air quality in the
room.
Automatic mode can run for a maximum of four hours.
Symbol Explanation
#
Fan on/off
=
Light on/off/dimming
&
Intensive mode
!
Automatic mode
A
Decrease fan setting/fan run-on
||| Settings area
@
Increase fan setting
Indicator/
symbol
Explanation
!
Metal grease filter saturation indicator
"
Activated charcoal filter saturation indicator
1-3 Fan settings
2
Intensive mode
x
Fan run-on
!
Automatic mode
D
Home Connect