12
en | General
LECTUS select
2021-02 | 01 | F.01U.389.837
Installation manual
Bosch Security Systems B.V.
1.7
Transponder data
The support of the transponder media listed below depends on the respective variant or
reading technology (hardware platform) and the respective reader firmware.
The following non-exhaustive list includes transponder media that is supported by the reader.
RF standard
Supported LEGIC
transponders
Other supported
transponders **
)
LEGIC RF standard
MIM22, MIM256, MIM1024,
CTC4096-MP410
ISO 14443 A
(also NFC Forum Type 2/4A
Tag *)
ATC512-MP, ATC2048-MP,
ATC4096-MP, CTC4096-
MP410, AFS4096-JP
according to ISO 14443 part
3/4:
e.g. Infineon SLE, SmartMX
Integrated support of MIFARE
Ultralight, MIFARE Classic,
MIFARE Plus and MIFARE
DESFire NFC peer-to-peer
target
ISO 14443 B ***)
(also NFC Forum Type 4B Tag
*)
according to ISO 14443 part
4:
e.g. B. InfineonSLE
ISO 15693
(also ISO 18000-3 mode 1)
ATC128-MV, ATC256-MV,
ATC1024-MV
Selected types, e.g. B. EM
4035, Infineon SRF55VxxP,
Tag-It HFI
INSIDE Secure (UID only)
according to INSIDE Secure
*) Passive mode, initiator
**) Access with transparent mode (assigned commands for MIFARE transponders)
***) If transponders according to ISO 14443 B (2001) are used, only one transponder is
allowed in the RF field. This restriction does not apply to transponders according to ISO
14443 B (2008).
****) The SONY FeliCa protocol is supported in accordance with ISO 18092 (6 byte
introduction). Older FeliCa cards with a shorter introduction are not supported.
i
Notice!
Recommendation when using smart card chips for LEGIC "card in card" solutions:
A suitability and functional test of the corresponding medium should be carried out before
use or if it is planned to be used.
