LB20 EVAC Cabinet Loudspeaker Models
Installation and wiring | en
11
Bosch Security Systems B.V.
Installation manual
2017.09 | V.02 | F.01U.345.361
2.
If 8 ohm mode is desired, remove the
safety screw
.
Safety screw (A) is shown in the previous step.
3.5
Replacing the logo
An additional logo is included, horizontal installation is shown.
To
replace the logo
, do the following:
1.
Remove the existing
logo
.
2.
Clean the
surface
with alcohol.
3.
Align the
logo
with the square guide.
4.
Remove the
paper backing
.
5.
Insert the
logo
.
Press firmly to ensure the logo is applied.