Bosch KN6 DV1 Series, Руководство пользователя

Страница: 7 / 24

Basic operation
en
7
Hot-
plate Name Activating and deactivating
Dual-circuit
hotplate Select a hotplate.
Touch ⁠.
Tri-circuit hot-
plate Select the hotplate.
¡
Touch ⁠.
Second filament circuit is
activated.
¡
Touch again.
Third filament circuit is
activated.
Notes
¡
Dark areas in the glow pattern of the hotplate are
part of the technical design. They do not affect the
functionality of the hotplate.
¡
The hotplate regulates the temperature by switching
the heat on and off. The heat may also switch on
and off when at the highest setting.
¡
With multi-circuit hotplates, the heating of the hot-
plate and the activated areas may switch on or off
at different times.
Reasons:
–
Easily damaged components are protected
against overheating.
–
The appliance is protected against electrical
overload.
–
This achieves a better cooking result.
Operating hotplates with the bridge heating
element
The bridge heating element lets you combine the
single-circuit and the dual-circuit hotplate to create one
large extended cooking zone. The two hotplates can
also be operated independently of each other.
Requirement:
Both hotplates are switched off.
1.
Switch on the dual-circuit hotplate.
2. Touch ⁠.
a
The outer filament circuit is activated.
a
The indicator lights up.
3.
Touch again.
a
The extended cooking zone is activated.
a The indicator lights up.
4.
To deactivate the bridge heating element, touch
again.
a
The extended cooking zone is deactivated.
a The display goes out.
Note:
If you activate the extended cooking zone with
the dual-circuit hotplate activated, the outer filament cir-
cuit is automatically deactivated.
4.5 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.
Display Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
The hotplate is hot.
5 Basic operation
5.1 Switching the hob on or off
The main switch is used to switch the hob on and off.
If you switch the appliance back on again within
4 seconds after switching off, the hob will start up with
the previously stored settings.
5.2 Switching on the hob
▶
Touch .
a
The light bar above lights up brightly.
a The displays for the controls and the heat setting
displays light up.
a The hob is ready for use.
5.3 Switching off the hob
The hob will switch off automatically when all hotplates
have been switched off for a while (10-60 seconds).
▶
Touch .
a
The light bar above goes out.
a
The displays go out.
a
All hotplates are switched off.
a The residual heat indicator remains on until the hot-
plates have cooled down sufficiently.
5.4 Setting the hotplates
To set a hotplate, it has to be selected.
Heat setting
1 Lowest setting
9 Highest setting
. Every heat setting has an intermediate
setting, e.g. 4.5.
5.5 Selecting heat settings
Requirement:
The hob is switched on.
1.
Select the hotplate with .
a
⁠. lights up brightly in the heat setting indicator.