Bosch KN6 DV1 Series, Руководство пользователя

Страница: 15 / 24

Home Connect
en
15
3.
Follow the instructions in the Home Connect app.
15.2 Overview of the Home Connect settings
You can adjust the settings and network settings for Home Connect by going to your hob's basic settings.
Setting Selection or display Additional information
⁠ ⁠ Network connection
– Not connected/disconnect network
– Connect automatically
– Connect manually
– Connected
Log on the hob in the Wi-Fi home network (Wi-Fi) or dis-
connect from the network
⁠ ⁠ Connection to app
– Not connected
– Connect
⁠ is only displayed if the hob is connected to the
home network.
⁠ ⁠ Connection to the Wi-Fi
– Wireless module switched off
– Wireless module switched on
If Wi-Fi has been activated, you can use the Home Con-
nect functions.
⁠ is only displayed if the hob has been previously
connected to a network.
⁠ ⁠ Set using the app
– Switched off
– Switched on
1
If ⁠ is switched off, only the hob's operating statuses
are displayed in the Home Connect app.
⁠ ⁠ Software update
– Update available and ready to in-
stall
– Start installation
⁠ is only displayed if a software update is available.
⁠ ⁠ Controlling remote access by after-
sales service
– Not authorised
– Authorised
⁠ is only displayed if after-sales service is attempting
to connect to the hob. After granting access, you can ter-
minate this at any time.
⁠ ⁠ Display Wi-Fi signal strength
– Not connected to the WLAN home
network (Wi-Fi)
– Signal strength 1 (poor)
– Signal strength 2 (moderate)
– Signal strength 3 (good)
⁠ is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
⁠ ⁠ Connection to Home Connect server
– Not connected
– Connected
⁠ is only displayed if there is a connection to the
WLAN home network (Wi-Fi).
1 Factory setting