2 609 932 675 | (14.10.08)
Bosch Power Tools
40
| English
Changing the Tool (see figure B)
f
Do not use double-sided screwdriver blades that are
longer than 25 mm.
Insert the screwdriver bit
1
directly into the tool holder
2
.
Eccentric Driver Head/Angle Driver Head/
Torque Attachment (see figures C
–
F)
The eccentric driver head
12
enables screwdriving close
to edges.
The angle driver head
13
enables screwdriving at hard to
reach locations.
With the torque presetting ring
15
on the torque attach-
ment
14
, the requested torque can be preset in 10 steps.
With the correct setting, the tool bit is stopped as soon
as the screw is driven flush into the material or when the
set torque is reached.
Assembly (see figures C–D)
For assembly of the attachments, pull the rubber cap
3
off
toward the front. Afterwards the attachments can be
mounted. The attachments can be mounted offset by
45°.
Dismounting (see figures E–F)
To dismount the attachments, turn the release ring
17
in
rotation direction
n
and pull the attachment off toward
the front. Afterwards, mount the rubber cap
3
again.
OBJ_BUCH-826-002.book Page 40 Tuesday, October 14, 2008 4:54 PM
