Bosch IntuiKey Series, Руководство пользователя

Страница: 12 / 50

8 en | Controlling Allegiant Series Video Switchers IntuiKey Keyboard
F.01U.127.291 | 1.93 | 2009.03 User Manual Bosch Security System, Inc.
2.1 The Allegiant Main Control Menu
To access the Allegiant Main Control menu:
1. Press PROD to put the keyboard in Product Selection Mode. The keyboard displays the
the Product Selection menu in the softkey display.
2. Press the Allegiant softkey button. The status display shows the Allegiant mode.
3. To select a camera, enter a valid 1 to 4 digit camera number using the numeric keypad
and press ENTER.
If the Allegiant is configured to operate in "6-digit Camera ID" mode, up to 6 digits can be
entered. If the new camera is at the same "site" as the current camera, simply enter 1 to
4 camera number digits.
If the desired camera is at a different "site", 5 or 6 digits must be entered. The first and
second digits are the site number and the remaining 4 digits, including any leading zeros
are the camera number at that site.
4. While in Allegiant mode, keyboard operators can use a convenient “Go Back” feature. To
go back to the previously selected camera, press and hold the CLR key for more than 1
second.
Figure 2.3 Allegiant Main Control Menu
2.2 Programming and Controlling Allegiant Functions
The Allegiant Main Control menu, displayed on the softkey display, uses the softkey buttons to
execute commands or to gain access to other submenus for additional programming/
configuration. Detailed command descriptions follow. Refer to the Allegiant Switcher
Instruction Book for additional information.
Exit
Device
Program
Alarm
Load
Hold
<Previous
Lockout
Sequence
Control
Sequence
Sequence
<Sequence
<Step
User
Log Off
Command
Script
Camera
Control
User
Functions
ADIM
Controls
Start
Sequence
Next >
Sequence>
Step>