Bosch Integra SHX45P02UC, Инструкция по эксплуатации

Страница: 16 / 80

16
8
Dishwasher Features & Options
Wash Cycles *
* The cycles listed below vary by models.
Power Scrub Plus
Cleans items having baked-on or hard dried food soils.
These items may require soaking or hand scouring.
Auto Plus
Designed to be used with heavily soiled dishes as well as
pots and pans.
Auto Wash
Takes the guesswork out of cycle selection. The sensors
in the dishwasher automatically adjust the cycle length,
temperature and water changes based on the soil load.
This cycle contains additional sensor decisions when
compared to other cycles.
Auto Delicate
Designed to be used with your fragile china and glassware,
allowing you to get it perfectly clean without the hassle of
hand washing or worry of damage in the dishwasher.
Regular Wash
Thoroughly cleans normal loads having loosely attached
normal soiling.
Quick Wash
Cleans lightly soiled dishes and reduces overall wash time.
Use this cycle to clean glasses and dessert dishes that may
need to be re-used at the same event.
Rinse & Hold
Allows you to rinse the food soil off of a partial load and
hold them in the dishwasher until there is a full load.
Wash Cycle Options *
* The options listed below vary by models.
Options can be used along with wash cycle to customize
load for personalized results:
1. Select wash cycle
2. Select option
3. Start dishwasher
Half Load
In the Power Scrub, Regular, and Auto Wash cycles you
can reduce the energy and water consumption when
washing small, lightly soiled loads that fill approximately
half the dishwasher’s capacity.
To activate, select the Half Load button in addition to any
of the three cycles listed above.
Extra Dry Heat
With this option you can raise the temperature of the rinse
water and increase the drying time for improved drying.
NOTE: The unit must be powered OFF before activating.
To activate:
Press and hold the left “Cancel Reset” button, then •
press and hold the ON/OFF button.
For units with a display when the LED display window •
indicates a “0” or “1” release both buttons.
To activate extra dry heat, press the left “Cancel Reset” •
button until the display indicates “1”.
To disable extra dry heat, press the left “Cancel Reset” •
button until the display indicates “0”.
Press the ON/OFF button to save the setting. •
Delay Start
This option allows you to delay the start time of your
dishwasher. To activate:
Turn the dishwasher on. •
Select the desired wash cycle. •
Press and hold the Delay Start button. Release •
when the desired delay time is shown in the display
window.
Cancel Drain
Reset