Bosch HSG732155M, Инструкция по установке и эксплуатации

Страница: 14 / 72

14
Removing the rotary spit
:
Risk of scalding!
The accessible parts become hot during operation. Never
touch the hot parts. Keep children at a safe distance.
Remove the rotary spit as follows:
1. Open the appliance door carefully and slide the rotary spit to
the right out of the motor mount.
2.
Pull the rotary spit shelf halfway out of the oven.
3.
Hold the rotary spit firmly on the left-hand side with oven
gloves and screw the handle onto the rotary spit.
4. Lift the rotary spit carefully out of the rotary spit shelf.
5.
Remove the rotary spit shelf and the baking tray.
How to use the timer
The timer runs independently of the oven.
Setting the duration
Turn the control knob once round clockwise, as far as the limit
stop, and then turn it anti-clockwise to set it to the required
time.
Elapsed cooking time
An audible signal sounds once the time has elapsed.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
:
Risk of electric shock!
Penetrating moisture may cause an electric shock. Do not use
any high-pressure cleaners or steam cleaners.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
Do not use
for the hob
■
undiluted washing-up liquid or dishwasher detergent
■
abrasive materials, scouring sponges
■
aggressive cleaners such as oven spray or stain remover
■
high-pressure cleaners or steam jet cleaners
Do not use
in the oven
■
harsh or abrasive cleaning agents
■
cleaning agents with a high alcohol content
■
hard scouring pads or cleaning sponges
■
high-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Area Cleaning agents
Appliance exterior Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove traces of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning prod-
ucts suitable for hot surfaces are availa-
ble from our after-sales service or from
specialist retailers. Apply a very thin layer
of the cleaning product with a soft cloth.
Aluminium and
plastic Glass cleaner:
Clean with a soft cloth.