15
Sensor Reheat
The Sensor Reheat feature lets you reheat dinner plates
or casseroles (8-12 oz.) for your cooking convenience.
Setting Sensor Reheat
1.
Touch
Sensor Reheat
once.
†§
-
‚
and START are
blinking in the display.
2.
Touch
Sensor Reheat
repeatedly until the desired
program number is shown in the display. Check the
menu label at the bottom of the oven cavity or see
program table below.
3.
Touch
Start/Enter
to start sensor reheat mode. The
appliance starts sensing, SENS. lights up in the
display. The microwave is operating during sensing.
When sensing is complete, two short beeps will sound
and the calculated cook time will start to count down.
Once sensor reheat is finished 4 beeps will sound. The
appliance turns off and the clock is displayed.
Note: Do not open the door during the sensing
process, or the program will be cancelled
. Once the
calculated cook time is displayed you can open the door
to stir, turn or rearrange the food. Touch
Start/Enter
to
resume operation.
Notes
▯
Cover with vented plastic wrap or wax paper.
▯
Reheat food on a microwaveable dinner plate.
Cancel operation
Touch
Clear/Off
to cancel the active oven mode. The
appliance turns off and the clock is displayed.
The cooling fans may continue to run for a while and then
switch off automatically.
Sensor Reheat programs
Reheat cooking suggestions
Sensor Cook
Sensor Cook allows you to cook many of your favorite
foods without selecting cooking times and power levels.
The microwave oven automatically determines the
required cooking time for each food item.
For best results for cooking by sensor, follow these
recommendations:
▯
Food cooked with the sensor system should start from
normal storage temperature.
▯
Turntable tray, glass tray and outside of container
should be dry.
▯
Foods should always be covered loosely with
microwavable plastic wrap, wax paper or lid.
▯
Do not open the door or touch
Clear/Off
key during
sensing time. When sensing time is over, the oven
beeps twice and the remaining cooking time will
appear in the display.
At this time you can open the
door to stir, turn or rearrange the food
.
Setting Sensor Cook
1.
Touch
Sensor Cook
once.
†™
-
‚
and START are
blinking.
2.
Touch
Sensor Cook
repeatedly until the desired
program number is shown in the display.
Program
no.
Food
Quantity
†§
-
‚
Dinner plate
1 serving
†§
-
ƒ
Casserole, pasta
1 to 4 servings
j
³
Food
Directions
Quantity
Dinner
plate
Use only pre-cooked, refriger-
ated foods. Cover plate with
vented plastic wrap or waxed
paper, tucked under plate. If
food is not hot enough after
heating with the Reheat feature,
continue heating using manual
time and power level setting.
Contents:
▯
3-4 oz. meat, poultry or fish
(up to 6 oz. with bone)
▯
1/2 cup starch (potatoes,
pasta, rice, etc.)
▯
1/2 cup of vegetables (about
3-4 oz.)
1 serving
(1 plate)
Casse-
role, Pasta
Cover plate with lid or vented
plastic wrap. If food is not hot
enough after heating with the
Reheat feature, continue heat-
ing using manual time and
power level setting.
Stir foods once before serving.
Contents:
▯
Casserole: refrigerated foods
(such as beef stew or lasa-
gna)
▯
Pasta: Canned spaghetti and
ravioli, refrigerated foods
1 to 4
servings