
Removing the magnetron
3.7
1
. Remove the housing.
2
. Discharge the HV capacitor.
3
. Remove the magnetron TCO.
4
. Disconnect the magnetron.
5
. Remove the left air guide.
6. Unscrew the magnetron.
NOTE:
When re-installing the magnetron, ensure that the fastening screws
are tightened to prevent microwave energy from escaping. Also
ensure that there is no gap between the hollow conductor and
magnetron.
Page 15 of 23 pages
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
______________________________________________________________________________________________________________________________________________________________________________
Copyright by BSH Home Appliances Corporation 1901 Main Street, Suite 600, Irvine CA 92614 700_ 58300000192890_ARA_EN_A 800 444-9091