Bosch HLS79R350A, Инструкция по эксплуатации

Страница: 28 / 60

en
Power manager
28
h
Power manager
Power manager
You can use the power manager to set the total power
of the hob.
The hob is preset at the factory. Its maximum
performance is specified on the rating plate. You can
use the power manager to change the value in
accordance with the requirements for the relevant
electrical installation.
In order not to exceed this set value, the hob
automatically distributes the power available between
the cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached,
¬
appears in the heat setting
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
hob is changed, see section
~
"Basic settings"
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to apply settings on
your appliance.
Switching the appliance on and off
Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.
Setting the heating function and temperature
The function selector and temperature selector make it
very easy to apply the settings you require to your
appliance. To find out which heating function is best for
which type of food, please refer to the beginning of the
instruction manual.
Example in the picture: Top/bottom heating
%
at
190 °C.
1.
Use the function selector to set the heating function.
2.
Use the temperature selector to set the temperature
or grill setting.
The appliance will start heating after a few seconds.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Note:
You can set both a cooking time and an end time
on the appliance.
~
"Time-setting options" on page 22
Changing
The heating function and temperature can be changed
at any time using the relevant selector.
If you change the heating function, the temperature will
be changed to the corresponding default value.
Rapid heating
With Rapid heating, you can shorten the heat-up time.
Suitable heating functions include:
■
<
3D hot air
■
%
Top/bottom heating
Only use Rapid heating when a temperature of over
100 °C has been selected.
To achieve an even cooking result, do not place your
food into the cooking compartment until Rapid heating
is complete.
1.
Set the heating function and temperature.
2.
Touch the
G
button.
The
c
symbol will appear on the display.
The oven will start heating after a few seconds.
Once Rapid heating is complete, an audible signal will
sound and the
c
symbol will go out.Place your food in
the cooking compartment.
ƒ&