en
Trouble shooting
26
3
Trouble shooting
Trouble shooting
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Fault table
If a dish does not turn out as well as you had hoped,
refer to the section entitled
Tested for you in our cooking
studio
. It contains useful tips and information on
cooking, baking, roasting and frying.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales technicians.
Fault
Possible cause
Remedy/information
The appliance does not start.
The fuse is faulty
Check the fuse in the fuse box.
Power failure
Check whether the kitchen light or other kitchen
appliances are working.
Disruption of gas supply
Make sure that the gas supply valves are open.
The oven light has failed.
The oven light is faulty
Replace the oven light. (see section entitled "Replac-
ing the oven light")
The gas burner does not ignite.
Power cut or damp ignition plugs
Light the gas burner with a gas lighter or a match.
Do not operate the oven without power.
The flame (oven) does not burn through all
outlet openings.
Normal build-up of dirt
The burner must be professionally cleaned.
All dishes prepared in the oven burn within a
short period of time.
The thermostat is faulty.
Call the after-sales service.
The door panel steams up when the oven
heats up.
This is a normal occurrence caused due to the
temperature difference
No intervention needed; this has no effect on perfor-
mance.
Fan position not working.
The grill selector is switched on.
Make sure that the grill selector is switched off.
Fan position is not selected
Make sure that the fan position is switched on.
Fan fault
Call the after-sales service.
The oven switches off.
The gas pressure is too high or too low
Check whether the correct pressure regulator is
being used.
Power failure
Check the oven's power supply.
Incorrect installation
Make sure that the appliance was installed accord-
ing to installation instructions.
The cooling fan is not working.
The cooling fan is faulty.
Call the after-sales service.