Operation - Cooktop
English 19
is clean and dry. If the burner still fails to ignite, see “Cooktop Troubleshooting
Chart” on page 44.
Caution:
All ignitors spark when any single burner is turned on. Do not
touch any of the burners when the cooktop is in use.
Failure to operate knobs properly may result in personal injury and damage to the
appliance.
Lighting the Burner during a Power Failure
Cooktop burners can be lit manually during a power failure. Hold a match at the
port and turn the knob to the HI position. Wait until the flame is burning all the way
around the burner before adjusting the flame to the desired
setting.
Setting the Flame Size
After lighting, turn the knob counterclockwise to the desired flame size. See
“Cooking Guide” on page 26 for recommended burner settings.
Caution:
To prevent possible burns or possible damage to the pan or the appli-
ance, the flame should not extend beyond the edge of the pan.
Turning the Burner off
Turn knob clockwise to the OFF position.
Note:
an “pop” may be heard when the burner is turned off. The “pop” may be
louder with LP gas than with natural gas. This is normal.
Содержание HGS7052UC
Страница 1: ...Gas Free Standing Ranges with European Convection Use and Care Manual ...
Страница 51: ...Service English 49 ...