21
Attaching the door
Reattach the oven door in the reverse sequence to removal.
1.
When attaching the oven door, ensure that both hinges are
inserted straight into the opening (figure A).
2.
The notch on the hinge must engage on both sides (figure B).
3.
Fold back both locking levers (figure C). Close the oven
door.
:
Risk of injury!
Risk of injury. If the oven door falls out accidentally or a hinge
snaps shut, do not reach into the hinge. Call the after
sales
service.
Trouble shooting
Trouble shooting
Faults often have simple explanations. Refer to the table before
calling the after-sales service, as you may be able to remedy
the fault yourself.
:
Risk of injury!
Incorrect repairs may cause serious hazards. Repairs to the
appliance must only be carried out by a qualified technician. If
repairs are required, contact the after-sales service.
Fault table
%
$
%
$
&
Fault
Possible cause
Remedy/information
The appliance is not working.
The circuit breaker is faulty
Look in the fuse box and check that the circuit
breaker is in working order.
Power cut
Check whether the kitchen light works.
The oven light has failed.
Faulty oven light
Change the oven light bulb. (See section
"Replacing the oven light")
The gas burner will not ignite.
Power cut or damp ignition plugs
Light the gas burner with a gas lighter or a
match.
Do not operate the oven without power.
The flame (oven) does not burn
through all outlet openings.
Normal build-up of dirt
The burner must be cleaned by a profes-
sional.
All dishes that are cooked in the oven
burn within an extremely short period
of time.
Faulty thermostat
Call the after-sales service.
The door panel steams up when the
oven is hot.
Normal occurrence; caused by the differ-
ence in temperature
Not possible; this has no effect on oven per-
formance.
The oven switches off.
The gas pressure is too high
Check whether the correct pressure regulator
is being used.
Power cut
Check the oven's power supply.
