Bosch HBM13B1.0B, Инструкция по эксплуатации

Страница: 20 / 24

20
ò
Top oven
Observe the notes in the table about preheating.
Tips for roasting and grilling
Food Dish Shelf posi-
tion
Type of
heating
Grill setting Time in minutes
Beef
Steaks
2-3 cm thick
Wire rack +
universal pan
2+
1
( *
3 1st side 10-13, 2nd side 6-8
Burgers
1-2 cm thick
Wire rack +
universal pan
2+
1
(
3 1st side 10-12, 2nd side 6-8
Lamb
Steaks
2-3 cm thick
Wire rack +
universal pan
2+
1
( *
3 1st side 6-8, 2nd side 4-6
Chops
2-3 cm thick
Wire rack +
universal pan
2+
1
(
*
3 1st side 7-9, 2nd side 5-8
Pork
Steaks
1-2 cm thick
Wire rack +
universal pan
2+
1
( *
3 1st side 9-12, 2nd side 6-8
Chops
2-3 cm thick
Wire rack +
universal pan
2+
1
(
* 3 1st side 10-13, 2nd side 8-12
Burgers
1-2 cm thick
Wire rack +
universal pan
2+
1
(
3 1st side 10-12, 2nd side 6-8
Sausages
2-4 cm thick
Wire rack +
universal pan
2+
1
(
3 14 ­ -18**
Chicken
Drumsticks
150 g each
Wire rack +
universal pan
2+
1
(
2 1st side 16-20, 2nd side 12-15
Breast (boneless)
150 g each
Wire rack +
universal pan
2+
1
(
2 1st side 13-15, 2nd side 8-10
Fish
Whole trout
300 g each
Wire rack +
universal pan
2+
1
(
1 25-30
Fillets
150 g each
Wire rack +
universal pan
2+
1
(
1 15-20
* Preheat for 3 minutes
** Turn frequently
The table does not contain information
for the weight of the joint.
Select the next lowest weight from the instructions and extend the time.
How to tell when the roast is ready. Use a meat thermometer (available from specialist shops) or carry out a “spoon test”.
Press down on the roast with a spoon. If it feels firm, it is ready. If the spoon can be
pressed in, it needs to be cooked for a little longer.
The roast is too dark and the crackling
is partly burnt.
Check the shelf height and temperature.
The roast looks good but the juices are
burnt.
Next time, use a smaller roasting dish or add more liquid.
The roast looks good but the juices are
too clear and watery.
Next time, use a larger roasting dish and use less liquid.
Steam rises from the roast when basted. This is normal and due to the laws of physics. The majority of the steam escapes through
the steam outlet. It may settle and form condensation on the cooler switch panel or on
the fronts of adjacent units.