Bosch HBC86K7.3N, Инструкция по эксплуатации

Страница: 13 / 40

13
Example in diagram: Top/bottom heating, 180 °C, 45 minutes
1.
Press the 0 button.
The time-setting options menu appears.
2.
Switch to the cooking time by turning the rotary selector.
3.
Press the X button to change the line.
4.
Turn the rotary selector to set the cooking time.
5.
Press the
0
button.
The time-setting options menu closes.
6.
If operation has not yet been started,
Press the
n
button.
You can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
0
button.
Cancelling the cooking time
Press the
0
button to open the menu. Use the rotary selector
to switch to the cooking time, press the
X
button and set the
cooking time to 00:00 by turning the rotary selector. Press
the
0
button to close the menu.
Changing the cooking time
Press the 0 button to open the menu. Use the rotary selector
to switch to the cooking time, press the
X
button and change
the cooking time by turning the rotary selector. Press the
0
button to close the menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example: you put the food in the cooking compartment at 9:30
am. It takes 45 minutes to cook and will be ready at 10:15, but
you would like it to be ready at 12:45 instead. Change the end
time from 10:15 to 12:45. The oven goes into standby.
Cooking starts at 12:00 and finishes at 12:45.
In some programmes, it is not possible to move the end time.
Setting the end time
Prerequisite: The selected operation has not already begun and
a cooking time has already been set. The time-setting options
menu 0 is open.
1.
Use the
Y
button to move to the top line and the rotary
selector to move to the end.
The time when the operation will be finished is displayed.
2.
Press the
X
button.
3.
Set a later end time by turning the rotary selector.
4.
Press the
0
button to close the time-setting options menu.
5.
Confirm by pressing the
n
button.
The setting is adopted. The oven is in standby mode 0 ... and
starts operation at the correct time.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the 0 button.
Changing the end time
This is possible, provided the oven is in standby mode
0
... . To
do so, press the 0 button to open the menu. Use the rotary
selector to change to end time. Press the
X
button and use
the rotary selector to correct the end time. Press the 0 button
to close the menu.
Cancelling the end time
This is possible, provided the oven is in standby mode
0
... .
Use the rotary selector to change to end time. Press the
X
button and turn the rotary selector anti-clockwise until the
display goes out. Press the 0 button to close the menu.
Setting the clock
The oven must be switched off before you can set or change
the clock.
&ORVHZLWK
7LPHU
PLQVHF
7LPHVHWWLQJRSWLRQV
&ORVHZLWK
7LPHVHWWLQJRSWLRQV
&RRNLQJWLPH
PLQVHF
&ORVHZLWK
&RRNLQJWLPH
PLQVHF
7LPHVHWWLQJRSWLRQV
7LPHVHWWLQJV
7RSERWWRPKHDWLQJ
ƒ&
&ORVHZLWK
(QG
7LPHVHWWLQJRSWLRQV
&ORVHZLWK
(QG
7LPHVHWWLQJRSWLRQV
7LPHVHWWLQJRSWLRQV
7RSERWWRPKHDWLQJ
ƒ&