Bosch HBC36D7.4, Инструкция по эксплуатации

Страница: 8 / 36

8
Clean the grease filter with hot soapy water or in the
dishwasher every time heavy dirt deposits have been left
behind after cooking.
Operating the appliance
In this section, you can read about
■
how to fill the water tank
■
how to switch the appliance on and off
■
what to note after each use
■
how you can use the recommended settings
Filling the water tank
When you open the appliance door, you will see the water tank
on the right-hand side.
Caution!
Use of unsuitable liquids may damage the appliance
■
Only use fresh tap water, softened water or uncarbonated
mineral water.
■
If your tap water is very hard, we recommend that you use
softened water.
■
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
You can obtain information about your tap water from your
water supplier. The water hardness can be checked with the
test strips enclosed.
Fill the water tank before each use:
1.
Open the appliance door and take out the water tank.
2.
Fill the water tank with cold water up to the "max" mark.
3.
Close the tank cover until you feel it engage.
4.
Slide in the water tank until it engages.
Switching on the appliance
1.
Press the
%
button to switch on the appliance.
The button description appears in the display for approx.
4 seconds. The display then changes automatically to the
"Types of heating" menu.
Or press the
å
button to go directly to the "Types of heating"
menu.
2.
Turn the rotary selector to set the desired type of heating.
3.
Press the
X
button.
The recommended temperature is highlighted.
4.
Turn the rotary selector to set the desired temperature.
For types of heating involving steam, you must now set a
cooking time (see also section: Time-setting options).
5.
Press the 0 button.
6.
Switch to cooking time using the rotary selector.
7.
Press the X button.
The default duration is highlighted.
8.
Turn the rotary selector to set the required cooking time.
9.
Press the
n
button to start cooking.
The appliance heats up.
For the Steam type of heating, the cooking time starts
counting down after the heating-up time.
"Fill water tank?" message
This message appears if you set a type of heating and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
PD[
Type of heating Temperature range
Hot air 30 - 230 °C
Steam 35 - 100 °C
Combination 120 - 230 °C
Reheat 100 - 180 °C
Prove 35 - 50 °C
Defrosting 35 - 60 °C
Slow cook 60 - 120 °C
Plate warming 30 - 70 °C
Keep warm 60 - 100 °C
7RSERWWRPKHDWLQJ
ƒ&
7\SHVRIKHDWLQJ
+RWDLU
ƒ&