Bosch HBB56 2 Series, Инструкция по эксплуатации

Страница: 7 / 36

7
Before the first use
This chapter indicates the steps that must be followed before
using your oven for the first time.
■
Setting the time
■
Heating the oven
■
Cleaning accessories
■
Read safety tips and warnings listed at the beginning of the
instructions. These are very important.
Setting the time
Once the oven has been connected, the 0 and ‹‹ : ‹‹
symbols light up on the display panel. Set the clock to the right
time.
1.
Press the 0 button.
The time symbol [ 0 ] and [ ‚ƒ : ‹‹ ] are displayed on the
display panel.
2.
Set the time using the control knob .
3.
Confirm time with the
0
button.
The programmed time is displayed after a few seconds.
Note:
See the Time functions chapter to change the time.
Heating the oven
To remove the "new" smell, heat the oven empty with the door
closed. The most effective option is to heat the oven for one
hour with the top and bottom heating elements % set at
240 ºC. Check that no packaging has been left inside the oven.
1.
Press the % button.
It is recommended to use the 3D hot air < type of heating at
a temperature of 160 °C. The square brackets appear on the
left and right of the heating type.
2.
Set the type of heating to top and bottom heating using the
control knob
%
.
3.
Select the temperature using the
X
button.
The square brackets appear on the left and right hand side of
the temperature.
4.
Turn the temperature knob to 240 ºC.
5.
Press the
n
button.
The oven comes on. The display shows the
n
symbol.
6.
After 60 minutes, turn the oven off using the % button.
The bars on the temperature control indicate the residual heat
inside the oven.
Cleaning the accessories
Before using the accessories for the first time, clean them
thoroughly using a cloth, hot water and a little soap.
Switching the oven on and off
You can switch the oven on and off with the
%
button.
Switching on
Press the % button.
The 3D hot air symbol
<
and a temperature of 160 °C are
displayed on the display panel as recommended values.
This configuration can be started directly or it is possible
■
to program a different type of heating and temperature
■
to select an automatic program with the button `
■
to select the clean function using the
p
button.
■
to start a configuration stored in the memory by pressing the
button
f
See individual chapters for more information on how to
program the appliance.
Switching off
Press the % button. The oven switches off.