Bosch HBB56 2 Series, Инструкция по эксплуатации

Страница: 10 / 36

10
3.
Set the cooking time using the control knob.
4.
Press the 0 button.
The "time functions" menu closes.
5.
If the oven has not been started, press the button n .
Cooking time progress is displayed.
The duration has finished
A beep will sound. The oven will stop heating. The cooking time
is
‹‹
:
‹‹
. The signal can be switched off using the
0
button.
To cancel a cooking time
Open the menu using the 0 button. Use the X button to the
pass to the cooking time function [ r ] and set it with the control
knob to ‹‹ : ‹‹ . Close the menu with the 0 button.
Adjusting the cooking time
Open the menu using the
0
button. Use the
X
button to
pass on to the cooking time function [
r
] and change it with the
control knob. Close the menu with the
0
button.
Delaying the end time
The end time can be delayed by:
■
for all types of heating
■
many programs,
■
The Clean function
Example: the dish is put in the oven at 9:30 a.m. 45 minutes of
cooking are required; so, it will be ready at 10:15 a.m.
However, you wish cooking to end at 12:45 p.m.
Change the end cooking time from 10:15 a.m. to 12:45 p.m.
The oven will begin working at 12:00 p.m. and finish working at
12:45 p.m.
This function is also compatible with cleaning. Cleaning can be
programmed at night so the oven is available during the day.
Please note that perishable food should not be left for too long
in the oven.
Delaying the end of the cooking time
Prerequisite: the time must be set. The oven must not be in
operation. The time functions menu 0 is open.
1.
Using the X button, select the end cooking time [ p ]
2.
Change the end time using the control knob.
3.
Press the 0 button.
The "time functions" menu closes.
4.
Confirm with the n button.
The oven is set to standby [ p ]. The end time is displayed on
the time indicator. As soon as it starts working, the cooking
time will be displayed.
The cooking time has elapsed
A signal sounds. The oven stops heating.
‹‹
:
‹‹
is shown on
the clock display. You can stop the audible signal by pressing
the
0
button.
Correcting the end time
This is only possible as long as the oven is in [ p ] standby.
Press the 0 button to open the menu. Move to the end time
using the X button. Adjust the end time using the rotary
selector. Press the 0 button to close the menu.
Cancelling the end time
This is possible, providing the oven is on standby. Select the
menu with the
0
button and move to the end time using
the
X
button. Turn the rotary selector anti-clockwise until the
current end time is reached. The cooking time immediately
starts to count down.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
After a power cut the display panel shows [ 0 ] y ‹‹ : ‹‹ . Set
the current time.
1.
Press the 0 button.
The display panel shows the function selected [ 0 ] and
[
‚ƒ
:
‹‹
].
2.
Set the current time using the control knob.
3.
Confirm with the 0 button.
The display panel shows the time.
Changing the time
If you want to change the time, e.g., going from summer to
winter time:
1.
Press the
0
button.
The time function menu opens.
2.
With the
X
button, change to the time [
0
].
3.
Set the current time using the control knob.
4.
Press the
0
button.
The display panel shows the time.
Hiding the clock
You can hide the clock. Then it will only appear when the oven
is switched on. For more information, refer to the Basic settings
section.