en
Appliance door
26
4.
Open the appliance door again slightly. Put the
cover back in place and press on it until it clicks
audibly into place (figure
#
).
5.
Close the appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Removing the door from the appliance
1.
Open the appliance door slightly.
2.
Press on the right and left side of the cover (figure
!
).
3.
Remove the cover (figure
"
).
4.
Loosen and remove the screws on the left and right
of the appliance door (figure
#
).
5.
Before closing the door again, trap a tea towel which
has been folded several times in the door (figure
$
).
Pull out the front panel upwards and lay it on a flat
surface with the door handle facing downwards.
6.
Push both retainers on the intermediate panel
upwards, but do not remove it (figure
%
). Hold the
panel with one hand. Remove the panel.
Clean the panels with glass cleaner and a soft cloth.
:
Warning
Risk of injury!
■
Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■
The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Fitting the door on the appliance
When fitting the intermediate panel, make sure that the
arrow is in the top right of the panel and that it aligns
with the arrow on the metal panel.
1.
Insert the intermediate panel at the bottom into the
retainer and push it in firmly at the top (figure
!
).
2.
Push both retainers downwards (figure
"
).
3.
Insert the front panel at the bottom into the retainers
(figure
#
).
4.
Close the front panel until both upper hooks are
opposite the opening (figure
$
).
2
1
2
1
