English |
5
Bosch Power Tools
1 609 92A 360 | (19.10.16)
Safety Warnings for Drills
Use auxiliary handle(s), if supplied with the tool.
Loss
of control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord.
Cutting ac-
cessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an
electric shock.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback.
The tool insert jams when:
– the power tool is subject to overload or
– it becomes wedged in the workpiece.
Secure the workpiece.
A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down.
The tool insert can jam and
lead to loss of control over the power tool.
Hold the machine with a firm grip.
High reaction torque
can briefly occur while driving in and loosening screws.
Products sold in GB only:
Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic, especially at hard to reach locations. Machines
with electronic speed control and right/left rotation are also
suitable for screwdriving and thread tapping.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Rotational direction switch
2
Thumbwheel for speed preselection
3
Chuck key
4
On/Off switch
5
Key type drill chuck
6
Insulated handle
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Assembly
Changing the Tool
Before any work on the machine itself, pull the mains
plug.
Open the key type drill chuck
5
by turning until the tool can be
inserted. Insert the tool.
Insert the chuck key
3
into the corresponding holes of the key
type drill chuck
5
and clamp the tool uniformly.
Screwdriver Tools
When working with screwdriver bits, a universal bit holder
should always be used. Use only screwdriver bits that fit the
screw head.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one’s health. Touching or breathing-in the dust can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dust, such as oak or beech dust, is considered car-
cinogenic, especially in connection with wood-treatment
Angle Drill
GWB 10 RE
Article number
0 601 132 7..
Rated power input
W
400
No-load speed
min
-1
0–1300
Rated speed
min
-1
0–750
Rated torque
Nm
2.2
Chuck clamping range
mm
10
Max. drilling dia.
– Steel
– Aluminium
– Wood
mm
mm
mm
10
12
22
Weight according to
EPTA-Procedure 01:2014
kg
1.6
Protection class
/
II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-524-003.book Page 5 Wednesday, October 19, 2016 10:19 AM
