GV2 Series Control Panels
|
Owner's Manual Supplement
16
Bosch Security Systems, Inc. | 2/07 | F01U063791-01
2.
Enter the number of the door to cycle then press [ENT]. This
door cycles and the display changes to reflect the new status
of the doors. For example, to cycle Door 3, at the
CYCLE DOOR 1 2 3 4 5 6 7 8
prompt, press [3], then press
[ENT]. The display shows
CYCLE DOOR 1 2 C 4 5 6 7 8
.
This indicates that all doors are in a normal state, except for
Door 3, which is cycled.
3.
Press [ESC] to leave this sub-function, or enter another door
number to cycle.
2.9.4
Unlock Door?
1.
To unlock a door to allow free access, at the
CYCLE DOOR?
prompt, press [NEXT] to enter the
UNLOCK DOOR?
sub-
function.
2.
The display shows
UNLOCK 1 2 3 4 5 6 7 8
if all doors are
in a normal state and available. If a door is not in a normal
state, the number of the door is replaced with a symbol
indicated in Table 3 on page 15.
3.
Enter the number of the door to unlock then press [ENT]. This
door unlocks and the display changes to reflect the new status
of the doors.
For example, to unlock Door 4, at the following prompt,
press [4], then press [ENT].
UNLOCK DOOR 1 2 3 4 5 6 7 8
The display shows
UNLOCK DOOR 1 2 3 U 5 6 7 8
This indicates that all doors are in a normal state, except for
Door 4, which is unlocked.
4.
Press [ESC] to leave this sub-function, or enter another door
number to unlock.
2.9.5
Secure Door?
1.
To secure a door to prohibit access to users regardless of their
access authority level, at the
CYCLE DOOR?
prompt, press
[PREV] to enter the
SECURE DOOR?
sub-function.
2.
The display shows
SECURE 1 2 3 4 5 6 7 8
if all doors are
in a normal state and available. If a door is not in a normal
state, the number of the door is replaced with a symbol
indicated in Table 3 on page 15.
