Bosch GTL 3 Professional, Оригинальное руководство пользователя

Страница: 24 / 368

1 609 929 S09 | (15.10.08) Bosch Power Tools
24 | English
– Position the measuring tool (without turn-
ing it) at a distance of 5 m so that the
crossing point of the laser lines is on the
already marked point
II
and that the 0°
laser line runs through the point
III
.
Mark the 45° laser line at a distance of
5 m (Point
IV
).
– Turn the measuring tool by 45° so that
the centre of the 0° laser line runs
through the point
IV
.
The crossing point of the laser lines must
still be on the point
II
.
Mark the 45° laser line at a distance of
5 m as point
V
.
– Turn the measuring tool by 45° so that
the centre of the 0° laser line runs
through the point
V
.
The crossing point of the laser lines must
still be on the point
II
.
Mark the 45° laser line at a distance of
5 m as point
VI
.
– Turn the measuring tool by 45° so that
the centre of the 0° laser line runs
through the point
VI
.
The crossing point of the laser lines must
still be on the point
II
.
– Mark the centre of the 45° laser line at a
distance of 5 m as point
VII
as near as
possible next to the point
I
.
– The difference d of the two points
VII
and
I
is the actual deviation of the 0° laser
line and the 45° laser line.
d
OBJ_BUCH-828-001.book Page 24 Wednesday, October 15, 2008 3:12 PM