English |
9
Bosch Power Tools
1 609 929 K81 | (21.4.08)
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
07.04.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
Replacing/Inserting the Saw Blade
f
Before any work on the machine itself, pull
the mains plug.
f
When mounting the saw blade, wear protec-
tive gloves.
Danger of injury when touching
the saw blade.
Selecting a Saw Blade
An overview of recommended saw blades can be
found at the end of these instructions. Use only
T-shank saw blades. The saw blade should not be
longer than required for the intended cut.
Use a thin saw blade for narrow curve cuts.
Jigsaw
GST 65
GST 65 B
Professional
GST 65 E
GST 65 BE
Professional
Article number
3 601 E09 1..
3 601 E09 2..
Stroke rate control
–
z
Rated power input
W
400
400
Output power
W
230
230
Stroke rate at no load n
0
spm
3100
500
– 3100
Stroke
mm
18
18
Cutting capacity, max.
–
in wood
–
in aluminium
–
in non-alloy steel
mm
mm
mm
65
12
3
65
12
3
Bevel cuts (left/right), max.
°
45
45
Weight according to EPTA-Procedure 01/2003
kg
1.7
1.7
Protection class
/
II
/
II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-290-004.book Page 9 Monday, April 21, 2008 11:30 AM
