1 609 929 N27 | (11.12.07)
Bosch Power Tools
18
| English
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially detri-
mental to health or carcinogenic, use a special
vacuum cleaner.
Replacing the Sanding Sheet
When attaching a new sanding sheet, remove any
dust or debris from the sanding plate
6
(e. g. with
a brush).
To ensure optimum dust extraction, pay atten-
tion that the punched holes in the sanding sheet
match with the holes in the sanding plate.
Sanding Sheets with Velcro Backing
(see figure A)
The sanding plate
6
is fitted with Velcro backing
for quick and easy fastening of sanding sheets
with Velcro adhesion.
Before attaching the sanding sheet
7
, free the
Velcro backing of the sanding plate
6
from any
debris by tapping against it in order to enable op-
timum adhesion.
Position the sanding sheet
7
flush alongside one
edge of the sanding plate
6
, then lay the sanding
sheet onto the sanding plate and press it against
it with a light turning motion in clockwise direc-
tion.
To remove the sanding sheet
7
, grasp it at one of
the tips and pull it off from the sanding plate
6
.
Sanding Sheets without Velcro Backing
(see figures B–D)
n
Press the release button
8
and keep it de-
pressed.
o
Guide the sanding sheet
7
to the stop under
the opened front clamping bracket
9
and let
go of the release button
8
again. Pay atten-
tion that the sanding sheet is clamped cen-
trally.
p
Press the sanding sheet clamp
5
inward and
pivot it to the stop.
q
Fold the sanding sheet
7
firmly around the
sanding plate. Guide the other end of the
sanding sheet
7
between the rear clamping
bracket and the red roller on the clamping
bracket
5
.
r
Hold the sanding sheet tensely and press the
clamping bracket
5
toward the sanding plate
to lock the sanding sheet.
Sanding sheets without holes, e. g. from rolls or
by the meter, can be punctured with the perfo-
rating tool
10
for use with dust extraction. For
this, press the machine with the mounted sand-
ing sheet onto the perforating tool (see figure E).
To remove the sanding sheet
7
, loosen the
clamping bracket
5
and pull out the sanding
sheet from the rear holding fixture. Press the re-
lease button
8
and completely remove the sand-
ing sheet.
Selecting the Sanding Sheet
Depending on the material to be worked and the
required rate of material removal, different sand-
ing sheets are available:
Grain size
For the working of
all wooden materials
40
—240
For coarse-sanding,
e. g. of rough, un-
planed beams and
boards
coarse
40, 60
For face sanding and
planing small irregu-
larities
medium 80, 100, 120
For finish and fine
sanding of hard
woods
fine
180, 240
For the working of
paint/enamel coats
or primers and fillers
40
—320
For sanding off paint coarse
40, 60
For sanding primer
medium 80, 100, 120
For final sanding of
primers before coat-
ing
fine
180, 240, 320
OBJ_BUCH-80-002.book Page 18 Tuesday, December 11, 2007 8:02 AM
Содержание GSS 23 AE
Страница 3: ...3 1 609 929 N27 11 12 07 Bosch Power Tools 1 3 2 4 7 8 9 5 6 GSS 23 AE Professional ...
Страница 4: ...4 1 609 929 N27 11 12 07 Bosch Power Tools F E D C 4 B A 7 6 5 8 9 7 7 5 10 11 6 2 1 3 ...
Страница 5: ...5 1 609 929 N27 11 12 07 Bosch Power Tools H G4 G3 G2 G1 4 12 4 4 13 14 12 ...
