8
| English
1 619 929 785 • 23.2.07
Technical Data
Product Features
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1
Dust protection cap
2
Locking sleeve
3
Chisel adjustment ring (Vario-Lock)
4
Lock-on button for On/Off switch
5
On/Off switch
6
Auxiliary handle
Illustrated or described accessories are not included as
standard delivery.
Assembly
Auxiliary Handle
f
Operate your power tool only with the auxil-
iary handle 6.
The auxiliary handle
6
can be set to any position for a
secure and low-fatigue working posture.
Turn the bottom part of the auxiliary handle
6
in coun-
terclockwise direction and swivel the auxiliary handle
6
to the desired position. Then retighten the bottom part
of the auxiliary handle
6
by turning in clockwise direc-
tion.
Changing the Tool
f
Before any work on the power tool itself, pull
the mains plug.
With the SDS-max tool holder, simpler and easier tool
changing is possible without additional aids.
The dust protection cap
1
largely prevents the entry of
drilling dust into the tool holder during operation. When
inserting the tool, take care that the dust protection
cap
1
is not damaged.
f
A damaged dust protection cap should be
changed immediately. We recommend having
this carried out by an after-sales service.
Inserting (see figure A)
Clean and lightly grease the shank end of the tool.
Push back the locking sleeve
2
and insert the tool in a
twisting manner into the tool holder. Release the lock-
ing sleeve
2
again in order to lock the tool.
Check the latching by pulling the tool.
Removing (see figure B)
Push back the locking sleeve
2
and remove the tool.
Demolition Hammer
GSH 388
Professional
GSH 388 X
Professional
Article number
0 611 388 0..
0 611 388 9..
Rated power input
W
1050
1050
Impact rate
bpm
2800
2800
Impact energy per stroke at output/rated power
J
10/8
10/8
Chisel positions
12
12
Chiselling capacity in concrete of medium hardness
kg/h
180
180
Tool holder
SDS-max
Hexagonal 17 mm
Lubrication
Oil lubrication
Oil lubrication
Weight according to EPTA-Procedure 01/2003
kg
4.9
4.9
Protection class
/
II
/
II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
OBJ_BUCH-288-001.book Page 8 Friday, February 23, 2007 10:25 AM
