English |
11
Bosch Power Tools
1 609 92A 2PU | (29.4.16)
Adjusting Cutter Clearance a
Before any work on the machine itself, pull the mains
plug.
The cutter clearance
a
(gap between the
cutters) depends on the sheet thickness
d
max
to be cut.
For softer or more ductile materials, the clearance
a
must be
decreased; for harder or more brittle materials, increased.
Loosen the fastening screw
7
for the bottom cutter. Adjust
the required cutter clearance
a
with the adjustment screw
6
.
The upper cutter
4
and the bottom cutter
5
may not touch
each other. Retighten the fastening screw
7
for the bottom
cutter with a tightening torque of 3–4 Nm.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull the mains
plug.
For safe and proper working, always keep the machine
and ventilation slots clean.
Replace the blade (see figure A)
The upper cutter
4
and the bottom cutter
5
are identical, have
four cutting edges each, and can be exchanged with each other.
Turn or replace the cutters in good time. Only sharp applica-
tion tools achieve good cutting capacity and make the ma-
chine last longer.
To replace the upper cutter
4
, loosen the fastening screw
3
; to
replace the bottom cutter
5
, loosen the fastening screw
7
.
Turn the cutter by 90° or install a new cutter. When installing
the bottom cutter
5
, pay attention that it faces against the ad-
justment screw
6
.
Note:
Turn the cutter only in the direction indicated in the figure
and insert a new cutter only in the position shown in the figure.
Cutting is not possible with an incorrectly inserted cutter.
Retighten the fastening screw
3
for the upper cutter and the
fastening screw
7
for the bottom cutter with a tightening
torque of 3–4 Nm. Check the cutter clearance
a
(see “Adjust-
ing Cutter Clearance a”, page 11).
Upper cutter
4
and bottom cutter
5
may not be reground.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can
also be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always
include the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: [email protected]
d
max
[mm]
Cutter clearance a
[mm]
0.3–0.6
0.10
0.8–1.2
0.25
1.3–1.6
0.30
a
OBJ_BUCH-460-004.book Page 11 Friday, April 29, 2016 1:34 PM
