English |
17
Cordless drill/driver
GSR 18V-85 C
GSB 18V-85 C
Permitted ambient temperature during opera-
tion
B)
and during storage
°C
–20 to +50
–20 to +50
Recommended rechargeable batteries
GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended chargers
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
Data transmission
Bluetooth
®
Bluetooth
® 4.1
(Low Energy)
C)
Bluetooth
® 4.1
(Low Energy)
C)
Signal interval
s
8
8
Max. signal range
D)
m
30
30
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The mobile terminal devices must be compatible with
Bluetooth
® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The
Bluetooth
® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/vibration information
Noise emission values determined according
to
EN 62841-2-1
.
GSR 18V-85 C:
Typically, the A-weighted sound pressure level of the power
tool is less than 70 dB(A). The noise level when working can
exceed the volume stated.
Wear hearing protection!
GSB 18V-85 C:
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
87
dB(A); sound power level
98
dB(A). Uncertainty K =
5
dB.
Wear hearing protection!
GSR 18V-85 C
GSB 18V-85 C
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to
EN 62841-2-1
:
Drilling into metal:
a
h
K
m/s
2
m/s
2
<2,5
1,5
<2,5
1,5
Impact drilling into concrete:
a
h
K
m/s
2
m/s
2
–
–
15,5
1,5
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Bosch Power Tools
1 609 92A 4T1 | (06.02.2020)
