Protection Against Deep
Discharging
The lithium ion battery is protected
a g a i n s t d e e p d i s c h a r g i n g b y t h e
“Electronic Cell Protection (ECP)”. When
the battery is empty, the tool is switched
off by means of a protective circuit.
Do not continue to
p r e s s t h e t r i g g e r
s w i t c h a f t e r t h e t o o l h a s b e e n
automatically switched off.
The battery
can be damaged.
Lock-Off Button
Your saw is equipped with a lock-off
button
9
to prevent accidental starting
of the tool. Press the lock-off button
9
forward to make it possible to press the
variable speed trigger switch
8
(Fig. 1).
Maximum Speed Dial
Your saw is equipped with a maximum
speed dial
7
. The blade stroke rate may
be adjusted during cutting operation by
presetting the dial
7
on or between any
one of the six numbers (Fig. 1).
Variable Speed Controlled
Trigger Switch
Your tool is equipped with a variable
speed controlled trigger switch
8
. To
t u r n t h e t o o l o n , p u s h t h e l o c k - o f f
button
9
and pull the trigger switch
8
(Fig. 1). The tool will turn itself off as
soon as you release the trigger.
The blade stroke rate can be adjusted
from the minimum to maximum stroke
rate (as set on the maximum speed dial)
by the pressure you apply to the trigger.
Apply more pressure to increase the
speed and release pressure to decrease
speed.
The required stroke rate is dependent
o n t h e m a t e r i a l a n d t h e w o r k i n g
conditions and can be determined by a
practical trial.
R e d u c i n g
t h e
s t r o k e
r a t e
i s
r e c o m m e n d e d w h e n t h e s a w b l a d e
engages in the material as well as when
sawing plastic and aluminum.
Constant Response Circuitry
The internal electronic feedback system
provides a "soft start", which will reduce
the stresses that occur from a high
torque start. The system also maintains
t h e s e l e c t e d s p e e d u n d e r l o a d f o r
maximum efficiency.
Vibration Control
T h i s t o o l f e a t u r e s a v e r y e f f e c t i v e
counterbalancing system to minimize
vibration for comfort and control.
Built-in Led Work Light
Your tool is equipped with an LED work
light
12
that turns on automatically
when the trigger switch is activated.
When the tool is turned off, the light
turns off (Fig. 1).
Orbital Action Settings
The adjustable orbital action allows for
optimal adaptation of cutting speed,
cutting capacity and cutting pattern to
the material being cut. With orbital
action switch
6
you can set the level of
orbital action (Fig. 1).
Orbital action switched off (level 0):
For cutting thin or hard material such as
sheet metal or steel. For achieving clean
cutting edges.
Orbital action level 1:
For cutting non-
ferrous metals, hardwood, plastics or
materials of medium density.
Orbital action level 2:
For cutting soft
materials, e. g., soft building materials,
insulation material, softwood.
Setting
Stroke Rate
( / min )
1
600
2
1000
3
1400
4
1800
5
2200
6
2500
-10-
Operating Instructions
Disconnect battery pack from tool before making any assembly,
adjustments or changing accessories.
Such preventive safety measures
reduce the risk of starting the tool accidentally.
