Bosch GS60, Инструкция по эксплуатации

Страница: 21 / 126

15
de
Vacuuming
Figure
Set the adjustable floor tool:
Rugs and carpets =>
Hard floors/parquet =>
If you are vacuuming up larger particles, make sure that
you vacuum them up successively and carefully to
ensure that the vacuum channel of the floor tool do not
become blocked.
If necessary, you should raise the nozz-
le in order to better vacuum up the dirt particles.
Figure
●
Open the accessories compartment by pressing the
release button.
●
Take the upholstery nozzle and crevice nozzle out of
the accessories holders.
●
Close the accessories compartment.
Vacuuming with accessories
Figure
Attach the nozzles to the suction pipe or handle as
required:
a) Crevice nozzle for vacuuming crevices and corners,
etc.
b) Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
After use, stow the crevice nozzle and upholstery nozzle
in the appliance.
c)
Hard floor brush for vacuuming hard floor coverings
(tiles, parquet flooring, etc.)
Figure
Cleaning the hard-floor brush
a)
Vacuum the brush from underneath to clean it.
b)
Cut through threads and hairs wound round the
rollers using scissors. Vacuuming strands and hairs
with the crevice nozzle.
Figure
You can use the parking aid on the side of the vacuum
cleaner if you wish to stop vacuuming for a short time.
●
Once you have switched off the appliance, slide the
hook on the floor tool into the recess on the side of
the appliance.
Figure
When vacuuming stairs, the appliance must be positioned
at the bottom of the stairs. Depending on the type of
staircase, you can vacuum 12 to 16 stairs with the suction
pipe, handle and floor tool fitted. If they do not reach far
enough, the appliance can also be carried using the car-
rying handle.
13
12
11
10
9
8
de
en
Fold out the picture pages.
Setting up
Figure
●
Push the flexible tube adapter into the air intake
opening on the appliance. Check for correct seating –
the moulded hook on the tube adapter must fit into
the recess in the air intake opening and audibly click
into place.
Figure
a)
Push the handle into the suction tube/telescopic
tube. To remove it, turn the handle slightly and pull it
out of the tube.
b) Push the handle into the telescopic tube until it
engages. To release the connection, squeeze the lock-
ing collar and pull out the handle.
Figure
a)
Insert the telescopic tube into the connecting piece of
the floor tool. To release the connection, turn the tube
slightly and pull it out of the floor tool.
b) Push the telescopic tube into the connecting piece of the
floor tool until it engages. Press the locking collar and
pull out the telescopic tube to release the connection.
Figure
●
Unlock the telescopic tube by moving the sliding switch
in the direction of the arrow and adjust to the desired
length.
Figure
●
Holding the power cord by the plug, pull out to the
required length and insert the plug into the mains socket.
Figure
●
To switch the vacuum cleaner on or off, press the
ON/OFF button.
Figure
Controlling the suction level
The suction level can be infinitely adjusted to the level
required by turning the control knob in the direction of
the arrow.
Low suction range =>
For vacuuming delicate fabrics, e.g. curtains.
Medium suction range =>
For daily vacuuming of lightly soiled surfaces.
High suction range =>
For vacuuming durable floor coverings, hard floors
and heavily soiled surfaces.
7
6
5
4
3*
2*
1
*Dependent on model