USB Charging
The
USB Port
is designed to charge most USB-enabled
devices such as cell phones and external digital media players.
Follow the steps below to charge your USB-enabled device:
1. USB charging is available when your Jobsite Radio is
plugged into a 120V power source or when the radio has
an 18V battery inserted and is turned on.
2. Insert the USB end of your device cable into the
USB Port
inside the
Digital Media Bay
. Insert the other end of your
device cable into your device. Your device should begin to
charge.
Note:
With your Jobsite Stereo plugged into a 120V power
source your USB-enabled device will power at any time. * Not
guaranteed to work with all USB-enabled devices.
11
AUX IN USB
Bluetooth
®
Pairing Function
1. Make sure your personal device’s Bluetooth
®
is turned on.
2. Turn on unit by pressing the
Power Button
.
3. Press the
Bluetooth
®
Pairing Button
or the
Tune/Source
button until Bluetooth
®
symbol is displayed
on the lower right hand side of the LCD screen and a
blue light is slowly flashing on the front of the unit.
4. Hold the
Bluetooth
®
Pairing Button
for more than .5
seconds.
5. Once the Bluetooth
®
symbol flashes quickly, select
"GPB18V-5C xxxx" from your personal device bluetooth
®
menu.
6. Once the device has been linked the Bluetooth
®
indicator
(on the screen) will light up continuously.
7. Select music from your personal device that you would
like to play.
8. Make sure to check the volume level on your personal
device as this will impact the volume output on the unit.
Note: Set your personal device audio output level to
100% to maximize audio output on the unit. Now control
volume with the volume control knob on the unit.
9. Press play on your personal device and enjoy.
VOLUME/
CLOCK
TUNE/
SOURCE
1
2
3
4
EQUALIZER
MUTE
FM
AM
AUX
STEREO
JAZZ
POP CLASSIC CUSTOM
ROCK
BAS PRESET
TRE
AM
PM
BLUETOOTH
®
PAIRING
BUTTON
BLUETOOTH
®
USB
PORT
